메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
조현혹 (부산대학교 공과대학 섬유공학과) 구본규 (부산대학교 공과대학 섬유공학과) 김경효 (부산대학교 공과대학 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제36권 제6호
발행연도
1999.1
수록면
434 - 444 (11page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The high speed melt spinning of sheath/core type bicomponent fibers was performed and the change of fiber structure with increasing take-up velocity was investigated. In this study, poly (ethylene terephthalate) (PET) and two kinds of high-density polyethylene (HDPE (11), HDPE (28)) were selected for the core and sheath, respectively. In general, the birefringence of the sheath part of single component fiber is higher than that of the core part. But the birefringence of sheath component (ie. HDPE(11) and HDPE(28)) of the bicomponent fibers used in this study was lower than that of core component. To understand how the structure of bicomponent fiber was formed at high speed spinning, numerical simulation was performed. The results of numerical simulation showed that the spinline stress of core component was higher than that of the sheath component in the region of structure formation and the difference between the stresses at the sheath and core increased with increasing take-up velocity. The results of numerical simulation coincided with the birefringence experimentally obtained. When higher tension is given to the fiber, the results of numerical simulation coincided well with the birefringence profiles. It seems that the birefringence of PET increased due to the increasing difference of stress between PET and HDPE components.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0