메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
박종범 (동부산전문대학 섬유디자인과) 조현혹 (부산대학교 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제34권 제5호
발행연도
1997.1
수록면
263 - 270 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (5)

초록· 키워드

오류제보하기
High-speed melt spinning of sheath-core type bicomponent fibers was performed and the changes of fiber structure and property with increasing take-up velocity were investigated. The structure and property of bicomponent PET fibers spun in high-speed were analyzed through the density, birefringence, wide-angle X-ray diffraction, DSC, and stress-strain measurements. Two kinds of polymers, low molecular weight poly(ethylene terephthalate) (LMPET, η =0.62 dl/g) and high molecular weight poly(ethylene terephthalate) (HMPET, η =1.05 dl/g), were selected and spun in a sheath-core type at various take-up velocities of 1~5.5 km/min. In the structure formation of LMPET/HMPET bicomponent fibers caused by high-speed spinning, the molecular orientation of LMPET component was smaller than that of HMPET component. Orientation-induced crystallization of LMPET/HMPET bicomponent fibers in high-speed spinning was observed at take-up velocity about 4~5 km/min. As the spinning velocity increased, the amorphous orientation factor increased but the average loss tangent $\delta$ decreased. In general, the LMPET/HMPET bicomponent fibers showed poor mechanical properties compared to that of LMPET single component fibers for high-speed spinning.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0