지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
The effects of risering design and alloying element on the formation of defects such as external depression, primary and secondary shrinkage cavities in ductile cast iron were investigated. Two types of risering design for the cylindrically step-wise specimen, No. 1(progressive solidification) and No. 2(directional solidification) risering designs, were prepared and six different alloy compositions were casted. In the No. 1 risering design, external depression or primary shrinkage cavities due to liquid contraction were observed in all the specimens from SG 10 to SG 60. The defects caused by liquid contraction seemed to be more affected by risering design than alloying elements. The secondary shrinkage cavities were also observed in all the specimens but a swollen surface was not observed in all the castings. The primary shrinkage cavities were located right under the top surface or connected to the top surface, and were characterized by smooth surfaces. On the other hand, the secondary shrinkage cavities were positioned in the thermal center of the specimen steps 3 and 4, and characterized by rough surfaces. In the No. 2 risering design, no external depression or primary shrinkage cavities due to liquid contraction were observed in all the specimens from SG 10 to SG 60. However, the secondary shrinkage cavities were formed in the thermal center of specimens SG 40, 50 and 60. Like the No. 1 risering design, a swollen surface was not observed in all the castings.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
회주철의 수축결함생성에 미치는 주조방안 및 화학조성의 영향
한국재료학회지
2003 .01
-
Effects of Processing and Designing Variables on Formation of Shrinkage Cavities in GC150 Gray Cast Iron
한국재료학회지
2002 .01
-
Solidifications Simulation of Gray Iron Sheave Product with Consideration of Graphite Precipitation
한국재료학회지
1999 .01
-
주강품 압탕 설계에 체적 수축을 고려한 응고해석의 적용
한국주조공학회지 (주조)
1995 .01
-
압탕 최소화를 위한 터보차저하우징의 융합 S/W 응용 제조기술 및 실험적 검증
한국주조공학회지 (주조)
2017 .01
-
진공흡입주형 주조법에서 주강의 압탕 방안 설계
한국주조공학회지 (주조)
2007 .01
-
The Effect of Internal Row on Marine Riser Dynamics
한국해안·해양공학회논문집
1995 .03
-
유동한계 고상율법을 이용한 수축공 생성의 수치해석
한국주조공학회지 (주조)
1998 .01
-
The Effect of Internal Flow on Vortex-Induced Vibration of Marine Riser
한국해안·해양공학회논문집
1995 .06
-
A comparison of coupled and uncoupled dynamic analysis for the flexible riser in shallow water
Journal of Advanced Marine Engineering and Technology (JAMET)
2014 .02
-
Evaluation of the Effect of Riser Support System on Global Spar Motion by Time-domain Nonlinear Hull/Mooring/Riser Coupled Analysis
한국해양공학회지
2005 .10
-
Numerical model of a tensioner system and riser guide
Ocean systems engineering
2013 .01
-
사출 금형 수축률 산정에 관한 연구
한국금형공학회지
2016 .01
-
Global stabilization of three-dimensional flexible marine risers by boundary control
Ocean systems engineering
2011 .01
-
역류방지 체크밸브의 응고해석 특성
동력시스템공학회지
2015 .06
-
Free Vibration of Marine Riser System with the Inclusion of Internal Flow
한국해안·해양공학회논문집
1996 .12
-
대형 주물품의 수축공 결함 발생저감을 위한 다공성필터 적용효과 분석
한국정밀공학회 학술발표대회 논문집
2015 .12
-
다물체계 동역학을 이용한 해양 플랜트의 라이저 인장 장치의 동적 거동 해석
한국CDE학회 학술발표회 논문집
2014 .02
-
심해용 시추 라이저 개발연구
한국생산제조학회 학술발표대회 논문집
2013 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0