지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
A frame element embedded normal to a shear wall or slab (shell element) is common in the structural systems. In that case there is a need for a membrane or shell element to have a normal rotation degree of freedom at each node in order to have a good result of stresses. Even if Many other people studied this area, All man, Cook and Sabir are representative investigators in this area. In this research paper, Sabir's methods of vertex rotation stiffness matrix in a membrane element are studied. New stiffness of vertex rotation are proposed by taking advantage of beam stiffness theory. Rectangular elements stiffness with rotational degree of freedom are compared in accuracy ratio each other.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Shell요소의 Normal Rotation
한국공간구조학회 춘계학술발표논문집
2006 .01
-
The use of the strain approach to develop a new consistent triangular thin flat shell finite element with drilling rotation
Structural engineering and mechanics : An international journal
2018 .01
-
Three dimensional non-conforming 8-node solid elements with rotational degrees of freedom
Structural engineering and mechanics : An international journal
1996 .01
-
개구부가 있는 부재의 변위변환행렬을 이용한 비선형 해석
대한건축학회 논문집 - 구조계
2006 .12
-
Mixed formulated 13-node hexahedral elements with rotational degrees of freedom: MR-H13 elements
Structural engineering and mechanics : An international journal
2001 .01
-
Defect-free 4-node flat shell element: NMS-4F element
Structural engineering and mechanics : An international journal
1999 .01
-
수정 요소강성매트릭스에 의한 병열전단벽의 해석 ( Analysis of Coupled Shear Wall By Modified Element Stiffness Matrix )
대한건축학회 학술발표대회 논문집 - 구조계
1986 .04
-
구조설계실무 현황을 고려한 전단벽 해석모형에 관한 고찰
대한건축학회 논문집 - 구조계
2018 .09
-
A new quadrilateral 5-node non-conforming membrane element with drilling DOF
Structural engineering and mechanics : An international journal
2002 .01
-
3차원 솔리드-평면 쉘 변환요소의 강성행렬 추정
대한건축학회 논문집 - 구조계
2014 .07
-
Static and dynamic analysis of circular beams using explicit stiffness matrix
Structural engineering and mechanics : An international journal
2016 .01
-
Utilization of Rotational Degrees of Freedom in Experimental Structural Dynamics
대한기계학회 기타 간행물
1993 .01
-
차체판넬 성형해석을 위한 쉘요소에 대한 연구
한국생산제조학회 학술발표대회 논문집
2011 .04
-
Vector algorithm for layered reinforced concrete shell element stiffness matrix
Structural engineering and mechanics : An international journal
1995 .01
-
Buckling Analysis of Composite Plates and Shells using Finite Element Method
한국강구조학회지
1994 .06
-
전단벽을 가진 프레임의 해석을 위한 유한요소 ( Finite Elements for Analysis of Frames with Shear Wall )
대한건축학회 학술발표대회 논문집 - 구조계
1985 .10
-
A four-node degenerated shell element with drilling degrees of freedom
Structural engineering and mechanics : An international journal
1998 .01
-
철근콘크리트 구조 골조해석용 강비 결정을 위한 실용식 유동에 관한 연구 ( A Study on Practical Equation of Stiffness Ratio in Reinforced Concrete Frames )
대한건축학회 학술발표대회 논문집 - 구조계
1990 .04
-
A new 3D interface element for three dimensional finite element analysis of FRP strengthened RC beams
Interaction and multiscale mechanics
2011 .01
-
Transition membrane elements with drilling freedom for local mesh refinements
Structural engineering and mechanics : An international journal
1995 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0