메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국초전도학회 Progress in superconductivity Progress in superconductivity 제5권 제2호
발행연도
2004.1
수록면
105 - 108 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
We have studied effects of in-situ annealing on the fabrication of superconducting MgB$_2$ thin films prepared by rf magnetron co-sputtering. The Films were deposited on A1$_2$O$_3$ (1102) substrates at room temperature by using Mg and B targets. To trap remnant $O_2$ gas in the chamber, we used 20 mtorr Af sputter-gas balanced with 5 mol % of H$_2$ gas. To enhance adhesion to the substrate a thin layer of B was deposited prior to the codeposition of Mg and B. After completion of the film deposition, an additional Mg layer was deposited on top to compensate for Mg loss during the subsequent in-situ annealing. We have investigated the effects of two most important annealing parameters that are the Mg-to-B composition ratio and the annealing temperature. The range of the Mg-to-B composition ratio was from 0.42 to 0.85, and that of the annealing temperature was 500 $^{\circ}C$∼750 $^{\circ}C$. The Best result was obtained for the composition ratio of about 10% Mg excess from the stoichiometry and the annealing temperature of 700 $^{\circ}C$. Based on these results, we obtained films with T$_{c}$ : 36.5 K by further refining the fabrication process.s.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0