메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
김혜림 (동아대학교 융합디자인연구소) 이선희 (동아대학교 패션디자인학과) 김한성 (부산대학교 유기소재시스템공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제56권 제6호
발행연도
2019.1
수록면
350 - 359 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
This study presents basic research on the fabrication of graphene coated textile-based triboelectric nanogenerators (T-TENGs). Graphene coated textiles, both with and without hot-pressing (PGR or GR, respectively), play an important role in electrodes. In this study, polyethylene terephthalate (PET) fabrics, polyurethane (PU) membranes and polytetrafluoroethylene (PTFE) film were used as dielectric materials. The resulting surface roughness was confirmed after the PGR was decreased by approximately 0.15 mm. The surface resistivity of the GR and PGR were within 104 Ω/sq and that of the dielectric materials were within 1012 Ω/sq. The current density of the GR showed the maximum value at 0.012 ㎂/㎠. The electric fields of the fabricated electrodes, GR and PGR, were 6.0 V/cm and 9.6 V/cm, respectively, and the J-E curves showed hysteresis characteristics as the electric field increased. The output voltage was measured according to the dielectric type to confirm the applicability of graphene coated textile electrodes in T-TENGs. Improved output voltage was observed upon using PTFE films as dielectrics as compared to other dielectrics, regardless of the type of graphene coated textile electrode. Moreover, the performance improved when the GR had a larger surface roughness value. Therefore, the electrical output voltage performance of T-TENGs using GR with PTFE film produced the best results and should be applied to T-TENGs in complementary experiments.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0