지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2018.1
- 수록면
- 362 - 368 (7page)
이용수
초록· 키워드
오류제보하기
Purpose: Self-sufficiency in paper production is desired in Nigeria. This study was aimed at evaluating the performance of a locally fabricated batch pulp digester. Methods: The pulp yields of sheaths generated as waste in the production of bamboo (Bambusa vulgaris) laminates were determined at different liquor concentrations and treatment time after preliminary experiments to ascertain the conditions under which the sheath started to pulp. Moreover, the optimum pulping conditions and fiber characteristics were determined and estimated, respectively, to ascertain the pulp fiber suitability for paper production. Results: An optimum pulp yield of 65.1% was obtained at 50% NaOH and 25% $Na_2S$ liquor concentration (w/w) when the cooking time was 4 h. The results of fiber characterization of the pulp indicated an average fiber length of 2.19 mm with a low Runkel ratio of 1.63, both of which signify the suitability of the pulp for medium quality paper production. Conclusions: Softwood pulp can be blended with the fibers to improve the strength of the produced paper; further investigation should be carried out to use other non-woody plants for pulp and papermaking.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Experimental Study of Pulp Suspension Flow in a Channel with Application to Papermaking
International Journal of Fluid Machinery and Systems
2018 .09
-
Advances in Research on Stem Cell-Based Pulp Regeneration
조직공학과 재생의학
2021 .12
-
펄프몰드 공정 중 탈수율에 대한 영향인자의 연구
한국생산제조학회 학술발표대회 논문집
2024 .12
-
Flow Characteristics of Pulp Suspension in a 90° Bend
International Journal of Fluid Machinery and Systems
2020 .06
-
Evaluation of Mechanical and Thermal Properties of Novel Pulp Powder/Polypropylene Composites
한국고분자학회 학술대회 연구논문 초록집
2019 .04
-
Fiber-Concentration Distributions of Papermaking Pulp Suspension Flowing in a Channel with a Sudden Expansion
International Journal of Fluid Machinery and Systems
2021 .06
-
표백 닥나무 펄프에서 추출한 3D 프린팅 닥나무 펄프 셀룰로우스 나노섬유의 제조 및 특성
대한기계학회 춘추학술대회
2024 .06
-
NC-KRAFT PULP 시트의 발수 특성 연구
한국추진공학회 학술대회논문집
2024 .05
-
제지공정 폐수 전처리 수질예측을 위한 실험적 모델과 통계적 모델 개발
상하수도학회지
2017 .01
-
Experimental Investigation of Fiber-concentration Distributions of Pulp Liquid Flow through a Divergent Tube
International Journal of Fluid Machinery and Systems
2021 .06
-
Pine cone의 리그닌 추출을 위한 Soda pulping 최적화 및 산 가수분해 특성
한국신·재생에너지학회 학술대회 초록집
2016 .11
-
Fiber-Concentration Distributions of Pulp Suspension Flow behind a Partition Plate Inserted in a Channel as Applied to a Papermaking Machine
International Journal of Fluid Machinery and Systems
2022 .09
-
Bioethanol production from soy pulp (Okara, Bisi) using galactose adapted yeast via separate hydrolysis and fermentation
한국생물공학회 학술대회
2016 .10
-
Preparation and Analysis of Nonwoven Biotextiles from Edible Mushroom Pulp
한국생물공학회 학술대회
2024 .09
-
펄프몰드 자동차 부품 포장재의 충격 흡수 해석을 위한 재료 특성 연구
한국자동차공학회 추계학술대회 및 전시회
2024 .11
-
Bioprinting of 3D Dentin-Pulp Complexes with Local Differentiation of DPSC
한국정밀공학회 학술발표대회 논문집
2019 .10
-
Bioprinting of 3D Dentin-Pulp Complex with Spatial Regulation of Dental Pulp Stem Cell Differentiation
한국정밀공학회 학술발표대회 논문집
2018 .10
-
[연구논문] 전기 저항을 이용한 부유선별공정 광액-포말 경계 검출 기법
한국자원공학회지
2022 .04
-
Direct Esterification of Wet Bleached Pulp for Improving Compatibility and Dispersion During Melt Mixing Process
한국고분자학회 학술대회 연구논문 초록집
2022 .10
-
Lignin extraction from Geodae-Uksae1 using Soda pulping followed by Evaluation on solvent recycling of Liquid-Liquid Extraction process
한국생물공학회 학술대회
2016 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0