지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2015.1
- 수록면
- 283 - 293 (11page)
이용수
초록· 키워드
오류제보하기
This paper presents the effects of elevated temperatures of $400^{\circ}C$ and $800^{\circ}C$ on the residual compressive strength and failure behaviour of fibre reinforced concretes and comparison is made with that of unreinforced control concrete. Two types of short fibres are used in this study e.g., steel and basalt fibres. The results show that the residual compressive strength capacity of steel fibre reinforced concrete is higher than unreinforced concrete at both elevated temperatures. The basalt fibre reinforced concrete, on the other hand, showed lower strength retention capacity than the control unreinforced concrete. However, the use of hybrid steel-basalt fibre reinforcement recovered the deficiency of basalt fibre reinforced concrete, but still slightly lower than the control and steel fibres reinforced concretes. The use of fibres reduces the spalling and explosive failure of steel, basalt and hybrid steel-basalt fibres reinforced concretes oppose to spalling in deeper regions of ordinary control concrete after exposure to above elevated temperatures. Microscopic observation of steel and basalt fibres surfaces after exposure to above elevated temperatures shows peeling of thin layer from steel surface at $800^{\circ}C$, whereas in the case of basalt fibre formation of Plagioclase mineral crystals on the surface are observed at elevated temperatures.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Behaviour of Carbon and Basalt Fibres Reinforced Fly Ash Geopolymer at Elevated Temperatures
International Journal of Concrete Structures and Materials
2018 .05
-
Formula to identify the Influence of steel fibres on the mechanical properties of HPC
Computers and Concrete, An International Journal
2020 .01
-
Comparison of macrosynthetic and steel FRC shear-critical beams with similar residual flexure tensile strengths
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Numerical modelling of the pull-out response of inclined hooked steel fibres
Advances in concrete construction
2015 .01
-
Mechanical behaviour of steel fibre reinforced SCC after being exposed to fire
Advances in concrete construction
2018 .01
-
Crack Propagation Analysis of Synthetic vs. Steel vs. Hybrid Fibre-Reinforced Concrete Beams Using Digital Image Correlation Technique
International Journal of Concrete Structures and Materials
2020 .11
-
Fast classification of fibres for concrete based on multivariate statistics
Computers and Concrete, An International Journal
2017 .01
-
Prediction of Hybrid fibre-added concrete strength using artificial neural networks
Computers and Concrete, An International Journal
2015 .04
-
Investigating the Hybrid Effect of Micro-steel Fibres and Polypropylene Fibre-Reinforced Magnesium Phosphate Cement Mortar
International Journal of Concrete Structures and Materials
2022 .09
-
Pullout Behaviour of Different Types of Steel Fibres Embedded in Magnesium Phosphate Cementitious Matrix
International Journal of Concrete Structures and Materials
2019 .05
-
Pull-Out Behaviour of Hooked End Steel Fibres Embedded in Ultra-high Performance Mortar with Various W/B Ratios
International Journal of Concrete Structures and Materials
2017 .06
-
Experimental and microstructural evaluation on mechanical properties of sisal fibre reinforced bio-composites
Steel and Composite Structures, An International Journal
2019 .01
-
Behaviour of hybrid fibre reinforced concrete beams strengthened with GFRP laminates
Structural engineering and mechanics : An international journal
2018 .01
-
Experiments on Tensile and Shear Characteristics of Amorphous Micro Steel (AMS) Fibre-Reinforced Cementitious Composites
International Journal of Concrete Structures and Materials
2017 .12
-
Shear and impact strength of waste plastic fibre reinforced concrete
Advances in concrete construction
2017 .01
-
Effect of fibre loading and treatment on porosity and water absorption correlated with tensile behaviour of oil palm empty fruit bunch fibre reinforced composites
Advances in materials research : AMR
2017 .01
-
Flexural behaviour of fibre reinforced geopolymer concrete composite beams
Computers and Concrete, An International Journal
2015 .03
-
Energy-Based Approach for Studying Fibre-Reinforced Concrete Subjected to Impact Loading
International Journal of Concrete Structures and Materials
2022 .07
-
Structural behaviour of HFRC beams retrofitted for shear using GFRP laminates
Computers and Concrete, An International Journal
2017 .01
-
Compressive and flexural behaviors of ultra-high strength concrete encased steel members
Steel and Composite Structures, An International Journal
2019 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0