Stiffening evaluation of flat elements towards stiffened elements under axial compression

Manikandan ,  P. ,  A 외 2명

Advances in computational design

2018 .01

Flexural performance of cold-formed square CFST beams strengthened with internal stiffeners

Ahmed W. Al-Zand ,  W.H. Wan Bada ,  uzzaman 외 4명

Steel and Composite Structures, An International Journal

2020 .01

Effect of angle stiffeners on the flexural strength and stiffness of cold-formed steel beams

M. Adil Da ,  N. Sub ,  amanian 외 8명

Steel and Composite Structures, An International Journal

2019 .01

The effects of stiffener configuration on stiffened T-stubs

Yasin Onu ,  alp Özkılıç

Steel and Composite Structures, An International Journal

2022 .08

Effect of web hole spacing on axial capacity of back-to-back cold-formed steel channels with edge-stiffened holes

Yaohui Chi ,  K ,  ishanu Roy 외 6명

Steel and Composite Structures, An International Journal

2021 .01

Experimental and analytical behavior of stiffened angle joints

Peng Wang ,  Jian ,  ong Pan 외 2명

Steel and Composite Structures, An International Journal

2018 .01

A comparison of structural performance enhancement of horizontally and vertically stiffened tubular steel wind turbine towers

Yu Hu ,  Jian Yang ,  Cha 외 2명

Structural Engineering and Mechanics, An Int＇l Journal

2020 .01

단일보강재로 보강된 하이브리드 보강강판의 면내 압축강도

김경식

한국강구조학회 논문집

2019 .02

Effect of stiffeners on failure analyses of optimally designed perforated steel beams

Fe ,  hat E ,  dal

Steel and Composite Structures, An International Journal

2016 .01

Nonlinear behavior of axially loaded back-to-back built-up cold-formed steel un-lipped channel sections

K ,  ishanu Roy ,  Tina Chui Huon Ting 외 2명

Steel and Composite Structures, An International Journal

2018 .01

Optimum arrangement of stiffener on the buckling behaviour of stiffened composite panels with reinforced elliptical cutouts subjected to non-uniform edge load

Akshay P ,  akash Kalgutka ,  Sauvik Bane 외 2명

Steel and Composite Structures, An International Journal

2022 .02

Formulation of continuous element of prestressed stiffened circular cylindrical shell

Imene Ha ,  baoui ,  Mohamed Amine Khadimallah 외 4명

Steel and Composite Structures, An International Journal

2021 .11

Behaviour and strength of back-to-back built-up cold-formed steel unequal angle sections with intermediate stiffeners under axial compression

G. Beulah Gnana Ananthi ,  K ,  ishanu Roy 외 1명

Steel and Composite Structures, An International Journal

2022 .01

Optimized stiffener detailing for shear links in eccentrically braced frames

Yasin O. Özkılıç

Steel and Composite Structures, An International Journal

2021 .01

Influence of stiffener edge on the buckling load of holed composite plates

Mahnaz Zake ,  i ,  Ali Mozaffa 외 3명

Steel and Composite Structures, An International Journal

2018 .01

Behavior of stiffened and unstiffened CFT under concentric loading, An experimental study

Ahmed F. Deifalla ,  Fattouh M. Fattouh ,  Mona M. Fawzy 외 2명

Steel and Composite Structures, An International Journal

2019 .01

Optimum design of stiffened plates for static or dynamic loadings using different ribs

Zoltán Vi ,  ág ,  Ká 외 2명

Structural Engineering and Mechanics, An Int＇l Journal

2020 .01

Web bend-buckling strength of plate girders with two longitudinal web stiffeners

김병준 ,  박용명 ,  김경식 외 1명

Structural Engineering and Mechanics, An Int＇l Journal

2019 .01