지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.29 No.5
- 발행연도
- 2018.1
- 수록면
- 681 - 688 (8page)
이용수
초록· 키워드
오류제보하기
In this paper, buckling load of edge stiffened composite plates is assessed. The effect of stiffener edge size, circular hole, and the fiber orientation angle on buckling behavior of composite plates under uni-axial compressive load is investigated. This paper includes two parts as experimental and numerical studies. L-shape composite plates are manufactured in three different layups. Then the buckling loads are experimentally determined. Subsequently, by using the numerical simulation, the size variation effects of stiffener edge and circular cutout on the plate buckling loads are analyzed in five different layups. The results show that cutout size, stiffener edge height and fiber orientation angle have important effects on buckling load. In addition, there is an optimum height for stiffener edge during different conditions.
목차
등록된 정보가 없습니다.
참고문헌 (39)
참고문헌 신청
Abolghasemi, S. / 2014 / Thermo-mechanical buckling analysis of functionally graded plates with an elliptic cutout / Aerosp. Sci. Technol 39(1):250~259
Mehmet Aktaş / 2014 / Buckling behavior of pultruded composite beams with circular cutouts / Steel and Composite Structures, An International Journal 17(4):359~370
American Society for Testing and Materials / 1995 / Standard test method for in-plane shear response of polymer matrix composite materials by tensile test of a ±45° laminateDesignation D3518 / ASTM International
American Society for Testing and Materials / 2000 / Standard test method for tensile properties of polymer matrix composite materials-Designation D3039 / ASTM International
American Society for Testing and Materials / 2001 / Standard test method for determining the compressive properties of polymer matrix composite laminates using a combined loading compression (CLC) test Fixture-Designation D6641 / ASTM International
Mehmet Aktaş / 2014 / Buckling behavior of pultruded composite beams with circular cutouts / Steel and Composite Structures, An International Journal 17(4):359~370
American Society for Testing and Materials / 1995 / Standard test method for in-plane shear response of polymer matrix composite materials by tensile test of a ±45° laminateDesignation D3518 / ASTM International
American Society for Testing and Materials / 2000 / Standard test method for tensile properties of polymer matrix composite materials-Designation D3039 / ASTM International
American Society for Testing and Materials / 2001 / Standard test method for determining the compressive properties of polymer matrix composite laminates using a combined loading compression (CLC) test Fixture-Designation D6641 / ASTM International
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Analysis of stiffened Al/SiC FGM plates with cutout under uniaxial and localized in-plane edge loadings
Structural Engineering and Mechanics, An Int＇l Journal
2024 .03
-
Vibration and buckling analyses of laminated panels with and without cutouts under compressive and tensile edge loads
Steel and Composite Structures, An International Journal
2016 .01
-
Comprehensive investigation of buckling behavior of plates considering effects of holes
Structural engineering and mechanics : An international journal
2018 .01
-
Optimum arrangement of stiffener on the buckling behaviour of stiffened composite panels with reinforced elliptical cutouts subjected to non-uniform edge load
Steel and Composite Structures, An International Journal
2022 .02
-
Optimum design for thermal buckling of composite plates with semi triangular cutout using PSO algorithm
Structural Engineering and Mechanics, An Int＇l Journal
2021 .10
-
Position optimization of circular/elliptical cutout within an orthotropic rectangular plate for maximum buckling load
Steel and Composite Structures, An International Journal
2018 .01
-
Numerical investigation of buckling strength of longitudinally stiffened web of plate girders subjected to bending
Structural engineering and mechanics : An international journal
2018 .01
-
The effects of stiffener configuration on stiffened T-stubs
Steel and Composite Structures, An International Journal
2022 .08
-
Buckling and Post buckling Analysis of Composite Plates with Internal Flaws
International Journal of Aerospace System Engineering
2015 .12
-
Numerical investigation of buckling strength of longitudinally stiffened web of plate girders subjected to bending
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Curvilinear free-edge form effect on stability of perforated laminated composite plates
Structural engineering and mechanics : An international journal
2017 .01
-
Web bend-buckling strength of plate girders with two longitudinal web stiffeners
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Curvilinear free-edge form effect on stability of perforated laminated composite plates
Structural Engineering and Mechanics, An Int＇l Journal
2017 .01
-
Buckling analysis of steel plates in composite structures with novel shape function
Steel and Composite Structures, An International Journal
2020 .01
-
Mechanical and thermal buckling analysis of laminated composite plates
Steel and Composite Structures, An International Journal
2021 .09
-
Post-buckling of cylindrical shells with spiral stiffeners under elastic foundation
Structural engineering and mechanics : An international journal
2016 .01
-
Post-buckling of cylindrical shells with spiral stiffeners under elastic foundation
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
The critical buckling load of reinforced nanocomposite porous plates
Structural engineering and mechanics : An international journal
2018 .01
-
Optimized stiffener detailing for shear links in eccentrically braced frames
Steel and Composite Structures, An International Journal
2021 .01
-
Buckling of axially compressed composite cylinders with geometric imperfections
Steel and Composite Structures, An International Journal
2018 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0