지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2015.1
- 수록면
- 891 - 918 (28page)
이용수
초록· 키워드
오류제보하기
In many of microdevices a part of a microbeam is covered by a piezoelectric layer. Depend on the application a DC or AC voltage is applied between upper and lower side of the piezoelectric layer. A common method in many of previous works for evaluating the response of these structures is discretizing by Galerkin method. In these works often single mode shape of a uniform microbeam i.e. the microbeam without piezoelectric layer has been used as comparison function, and so the convergence of the solution has not been verified. In this paper the Galerkin method is used for discretization, and a comprehensive analysis on the convergence of solution of equation that is discretized using this comparison function is studied for both clamped-clamped and clamped-free microbeams. The static and dynamic solution resulted from Galerkin method is compared to the modal expansion solution. In addition the static solution is compared to an exact solution. It is denoted that the required numbers of uniform microbeam mode shapes for convergence of static solution due to DC voltage depends on the position and thickness of deposited piezoelectric layer. It is shown that when the clamped-clamped microbeam is coated symmetrically by piezoelectric layer, then the convergence for static solution may be obtained using only first mode. This result is valid for clamped-free case when it is covered by piezoelectric layer from left clamped side to the right. It is shown that when voltage is AC then the number of required uniform microbeam shape mode for convergence is much more than the number of required mode in modal expansion due to the dynamic effect of piezoelectric layer. This difference increases by increasing the piezoelectric thickness, the closeness of the excitation frequency to natural frequency and decreasing the damping coefficient. This condition is often indefeasible in microresonator system. It is concluded that discreitizing the equation of motion using one mode shape of uniform microbeam as comparison function in many of previous works causes considerable errors.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Free vibrations of fluid conveying microbeams under non-ideal boundary conditions
Steel and Composite Structures, An International Journal
2017 .01
-
Study and analysis of the free vibration for FGM microbeam containing various distribution shape of porosity
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
Size-dependent free vibration and dynamic analyses of a sandwich microbeam based on higher-order sinusoidal shear deformation theory and strain gradient theory
Smart Structures and Systems, An International Journal
2018 .01
-
Size-dependent free vibration and dynamic analyses of a sandwich microbeam based on higher-order sinusoidal shear deformation theory and strain gradient theory
Smart structures and systems
2018 .01
-
Vibration analysis of different material distributions of functionally graded microbeam
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Free vibration of sandwich micro-beam with porous foam core, GPL layers and piezo-magneto-electric facesheets via NSGT
Computers and Concrete, An International Journal
2020 .01
-
Vibration analysis of generalized thermoelastic microbeams resting on visco-Pasternak's foundations
Advances in aircraft and spacecraft science
2017 .01
-
Nonlinear thermal vibration of pre/post-buckled two-dimensional FGM tapered microbeams based on a higher order shear deformation theory
Steel and Composite Structures, An International Journal
2021 .12
-
Forced vibration analysis of cracked functionally graded microbeams
Advances in nano research
2018 .01
-
Active control of three-phase CNT/resin/fiber piezoelectric polymeric nanocomposite porous sandwich microbeam based on sinusoidal shear deformation theory
Steel and Composite Structures, An International Journal
2019 .01
-
Size-dependent dynamic stability of a FG polymer microbeam reinforced by graphene oxides
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
On bending analysis of perforated microbeams including the microstructure effects
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
Free vibration analysis of a three-layered microbeam based on strain gradient theory and three-unknown shear and normal deformation theory
Steel and Composite Structures, An International Journal
2018 .01
-
Damping and vibration analysis of viscoelastic curved microbeam reinforced with FG-CNTs resting on viscoelastic medium using strain gradient theory and DQM
Steel and Composite Structures, An International Journal
2017 .01
-
Preparation of Highly (002) Oriented Ti Films on a Floating Si (100) Substrate by RF Magnetron Sputtering
Electronic Materials Letters
2020 .01
-
Free vibration analysis of a piezoelectric nanobeam using nonlocal elasticity theory
Structural engineering and mechanics : An international journal
2017 .01
-
Nonlinear magneto-electro-mechanical vibration analysis of double-bonded sandwich Timoshenko microbeams based on MSGT using GDQM
Steel and Composite Structures, An International Journal
2016 .01
-
Computing of output of piezoelectric actuator under voltage excitation
Smart Structures and Systems, An International Journal
2024 .05
-
압전소자를 이용한 자동차 휠너트 축력 측정법 개발
한국생산제조학회 학술발표대회 논문집
2019 .05
-
Unified solutions for piezoelectric bilayer cantilevers and solution modifications
Smart structures and systems
2015 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0