지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 동향자료
- 저자정보
- 발행연도
- 2008.1
- 수록면
- 200 - 202 (3page)
이용수
초록· 키워드
오류제보하기
In order to improve the thermal stability of PAN-based electrospun fibers, AP-PER-MEL and $TiO_2$ were added in to the fibers as additives. The polymer composite with uniformly mixed additional agents was obtained. In case of non-treated sample, the fibers were burn off completely with high rate within $620^{\circ}C$. But in case of treated samples (EF-M and EF-MT), it is sure that the thermal stability was improved by studying TGA data and ISO flammability test about 20 and 30%, respectively. A synergy effect of adding two kinds of agents (AP-PER-MEL and $TiO_2$) into PAN-based electrospun fibers was confirmed. Through SEM images, it is confirmed that the fiber shape can be kept even after addition of agents (AP-PER-MEL and $TiO_2$). Finally the thermal stability of fibers was largely developed with keeping the nature of PAN-based fibers effectively.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Manufacturing and characteristics of PAN-based composite carbon fibers containing cellulose particles
Carbon letters
2015 .01
-
Fabrication of Electrospun Carbon Nanocomposite Fibers from PAN and PAA Blended Solutions
Carbon science
2007 .01
-
Influence of oxidative atmosphere of the electron beam irradiation on cyclization of PAN-based fibers
Carbon letters
2015 .01
-
난기류 혼합법을 이용한 목섬유-열가소성 섬유 복합재에 관한 연구(I) - 공정변수가 복합재의 물리적 성질에 미치는 영향 -
목재공학(Journal of the Korean Wood Science and Technology)
1996 .01
-
Effect of additional heat-treatment temperature on chemical, microstructural, mechanical, and electrical properties of commercial PAN-based carbon fibers
Carbon letters
2011 .01
-
난기류 혼합법을 이용한 목섬유-열가소성 섬유 복합재에 관한 연구(II) - 공정변수가 복합재의 기계적 성질에 미치는 영향 -
목재공학(Journal of the Korean Wood Science and Technology)
1997 .01
-
Carbon Fibers (I): General Understanding and Manufacturing Techniques of Carbon Fibers
Carbon letters
2008 .01
-
Conversion of Carbon Fiber into Silicon Carbide Fiber by Pack-Cementation
Carbon science
2000 .01
-
Characterization and Fabrication of Chemically Activated Carbon Fibers with Various Drying Temperatures using OXI-PAN Fibers
Carbon science
2007 .01
-
High - Resolution Interrogation Technique for Fiber Bragg Grating Sensor Using Long - Period Fiber Grating Pair and Erbium - Doped Fiber
Current Optics and Photonics
2002 .03
-
Microstructural changes of polyacrylonitrile-based carbon fibers (T300 and T700) due to isothermal oxidation (1): focusing on morphological changes using scanning electron microscopy
Carbon letters
2016 .01
-
Introduction of modified methods of preparing fiber cross sections for the comparison of fibers
한국분석과학회 학술대회
2018 .11
-
Effects of Polymerization and Spinning Conditions on Mechanical Properties of PAN Precursor Fibers
Carbon letters
2010 .01
-
SOME PROPERTIES OF FIBER PRODUCTS OF THREE MODULES
호남수학학술지
2010 .01
-
Preparation and thermal properties of polyethylene-based carbonized fibers
Carbon letters
2015 .01
-
Dietary Fiber의 분석방법에 관한 고찰
한국영양학회지
1992 .02
-
Carbon Fibers (II): Recent Technical Trends and Market Prospects of Carbon Fibers
Carbon letters
2008 .01
-
Development and Evaluation of Turbulent Air Mixing Process for Manufacturing Wood Fiber and Thermoplastic Fiber Composites
목재공학(Journal of the Korean Wood Science and Technology)
1998 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0