메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
강대곤 (보건복지부) 한승훈 (경상대학교) 박재학 (충북대학교)
저널정보
한국동력기계공학회 동력시스템공학회지 동력시스템공학회지 제24권 제6호
발행연도
2020.12
수록면
36 - 44 (9page)
DOI
10.9726/kspse.2020.24.6.036

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Fiber-reinforced plastics are widely used in marine manufacturing. The number of FRP material fishing vessels steadily increases since 1992, up to 531.9% in 2018. The ratio of the number of FRP fishing vessels to that of the total fishing vessels increases from 15.4% in 1992 to 96.9% in 2018. The disadvantage is that FRP vessels are easily broken by external impacts. Recently, various studies have been conducted to enhance the strength and elastic modulus by mixing alumina powder with resin. In this study, the resin was mixed with alumina powder at a rate of 0%, 1%, 5% and 10%, and applied to the middle layer. From the experiment results, it was found that the resin mixed with alumina powder by 5% (AL5L-5) showed the highest tensile strength and an improvement in strength by 5.4% compared to the neat resin. The tensile stress-displacement curve showed a sharp vertical bent at the final fracture surface. The pop-in phenomena was also in the resin mixed with alumina powder. In their stress-strain curves, the stress dropped momentarily and then increased again. Neat resin specimens showed the highest at flexural strength. In the elastic flexural modulus results, the neat resin and AL5L-10 exhibited the highest values. In the flexural specimen, cracks generally began from the lower surface of the specimen. As the ratio of alumina powder increased, the crack progression length and the total crack area decreased.

목차

Abstract
1. 서론
2. 연구방법
3. 시험결과 및 파단특징
4. 결론
References

참고문헌 (14)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2021-550-001440543