메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Inyoung Park (Gyeongsang National University) Jungpil Noh (Gyeongsang National University) Yongsup Yun (Korea Maritime & Ocean University) Jeonghyeon Yang (Gyeongsang National University)
저널정보
한국마린엔지니어링학회 Journal of Advanced Marine Engineering and Technology (JAMET) 한국마린엔지니어링학회지 제44권 제6호
발행연도
2020.12
수록면
453 - 456 (4page)
DOI
10.5916/jamet.2020.44.6.453

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
An exhaust gas cleaning system (EGCS) is a requisite in ships for complying with the IMO 2020 global sulfur limit requirements. However, corrosion in the distance piece between the EGCS overboard valve and ship hull can cause a large amount of seawater to enter the engine room. Although the distance piece is constructed according to an approved design employing steel piping with an epoxy coating, acidic wash water still comes into contact and reacts with the steel pipe. This is most likely caused by a defect in the epoxy coating or damage to the coating incurred during pipe installation. The results of this study show the importance of maintaining cleanliness during surface treatment and proper painting thickness during pipe installation. This study focuses on the importance of selecting the correct design and appropriate materials for the EGCS discharge water distance piece.

목차

Abstract
1. Introduction
2. Experiment
3. Results and Discussion
4. Conclusions
References

참고문헌 (6)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2021-559-001450253