메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
최윤덕 (한국항공대학교) 부준홍 (한국항공대학교) 한창우 (효성) 정승붕 (효성)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2020년 학술대회
발행연도
2020.12
수록면
526 - 530 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Experimental investigation was conducted on the convective heat transfer coefficient in a vertical flat-plate evaporator of a loop-type heat pipe, of which the working fluid was distilled water. The evaporator was made of copper and the heating area dimensions were 190×114 ㎟. The condenser was an air-cooled fin-tube heat exchanger. Heat flux was varied from 5 to 139 kW/㎡, while the evaporator was maintained below 100°C. Three different evaporator surface conditions were compared: bare surface, screen mesh covered, and hybrid wick covered. The wick-covered surfaces exhibited distinctly higher heat transfer to bare surface, for heat fluxes higher than 88 kW/㎡. The bare surface showed moderately higher heat transfer coefficients for heat fluxes up to 69 kW/㎡, but decreased thereafter and eventually resulted in overheating at 106 kW/㎡. The surface with a hybrid wick exhibited a heat transfer coefficient of 10,300 W/㎡·K at a heat flux of 139 kW/㎡.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 실험결과 및 토론
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0