메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김명진 (이케이 어소시에이트) 김경수 (이케이 어소시에이트) 이왕도 (한국지질자원연구원) 김태우 (한국지질자원연구원) 한상목 (한국지질자원연구원) 우남섭 (한국지질자원연구원) 김영주 (한국지질자원연구원)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2020년 학술대회
발행연도
2020.12
수록면
1,212 - 1,216 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Cuttings transport and hole cleaning is important for an effective well drilling operation. And in directional drilling, it is very important to understand the drilling multi-phase flow characteristics because it is difficult to control cuttings transport. Therefore, various researches have been steadily conducted for efficient drilling technology development and field application, and many papers on drilling flow have been published. API developed Carrying Capacity Index(CCI) for describe hole cleaning also recommend an analytical and numerical approach. In this study, two empirical equations of Larsen’s model and Rubiandini’s model for the cuttings piece transfer velocity were applied to the numerical analysis technique. Through the two models, the minimum fluid velocity at which the cuttings in the inclined annular are not stagnant and can be transported was calculated and compared with the numerical analysis results. This simulation was performed with the DDPM + DEM model, and it is expected that it can be used to establish a safer and more effective drilling plan in a new drilling environment in the future.

목차

Abstract
1. 서론
2. 이론 및 실험
3. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0