메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
엄준현 (G.F TEK) 정영국 (Sehan University)
저널정보
한국조명·전기설비학회 조명·전기설비학회논문지 조명·전기설비학회논문지 제35권 제5호
발행연도
2021.5
수록면
25 - 32 (8page)
DOI
10.5207/JIEIE.2021.35.5.025

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (15)

초록· 키워드

오류제보하기
When controlling the output voltage of a quasi-Z-source AC converter, the conventional switching method can only obtain the output voltage of in-phase boost mode and out-of-phase buck boost mode. Therefore, a cascade connection method of an additional quasi-Z-source AC converter was studied to obtain the in-phase buck voltage required in the industrial field. Since this method uses two converters, the hardware is bulky and there are problems such as resonance. In this study, we propose a simple duty ratio control method that can operate in the in-phase buck mode in addition to the in-phase boost mode and the out of phase buck-boost mode without additional quasi Z source AC converter. To verify the validity of this study, PSIM simulations and experiments were performed. As a result, the proposed method can operate not only in the in-phase boost and out of phase buck-boost modes, but also in the in-phase buck mode, and the output voltage is kept constant in the transient state of a sudden load change. Finally, the input power factor and efficiency are more than 90% in most areas when operating in the in-phase mode, but relatively low in the out of phase mode.

목차

Abstract
1. 서론
2. 제안된 시스템
3. 실험 고찰
4. 결론
References

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0