메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
엄준현 (G.F TEK) 정영국 (Sehan University)
저널정보
한국조명·전기설비학회 조명·전기설비학회논문지 조명·전기설비학회논문지 제35권 제6호
발행연도
2021.6
수록면
26 - 35 (10page)
DOI
10.5207/JIEIE.2021.35.6.026

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (15)

초록· 키워드

오류제보하기
The quasi Z-source dynamic voltage restorer using the conventional switching scheme was able to obtain only the compensation voltage in the out of phase buck-boost mode for voltage swell compensation of the power source and the in-phase boost mode compensation voltage for more than 50% voltage sag compensation. Since this method cannot compensate for the voltage sag of 1-50%, which mainly occurs in industrial fields, a method of connecting additional quasi Z source converter in series and parallel was studied. In this study, a simple duty ratio scheme was proposed which is can be operated as an out of phase buck boost mode to compensate for swell, an in-phase boost mode to compensate for sag of 50% or more and an in-phase buck mode to compensate for sag of 1-50%. In order to prove the validity of this study, PSIM simulation and DSP based experiment were performed. As a result, by the proposed duty ratio control scheme, it was possible to compensate both the in-phase buck boost mode and the out of phase buck boost mode for sag and swell with a single quasi Z-source dynamic voltage compensator. Finally, for each load of 50Ω and 100Ω even if the voltage sag and swell were generated step by step by 10%, the voltage compensation rate remained almost 1, and the THD of the voltage was all good at 5% or less.

목차

Abstract
1. 서론
2. 제안된 시스템
3. 실험 고찰
4. 결론
References

참고문헌 (10)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2021-565-001769780