지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2021.8
- 수록면
- 409 - 418 (10page)
이용수
초록· 키워드
오류제보하기
Friction Stir Welding (FSW) is a solid-state welding technique that uses the heat generated from friction to assemble a wide variety of materials. Irrespective of having a lower heat input as compared to conventional welding techniques, friction stir welds are still prone to significant thermal-induced stresses and distortions owing to the uneven heating and cooling cycles that a weld goes through. Surprisingly, not several reviews have addressed both the residual stresses and distortions of friction stir welds despite their crucial impact on the weld performance. Therefore, the current paper reviews their development, their correlation with process parameters, and ways to reduce them. Moreover, it explains the current status of process modeling and research gaps in the area of interest.
목차
Abstract
1. Introduction
2. Residual States Development
3. Effect of Process Parameters on Residual States
4. Residual States Mitigation Techniques
5. Residual States Modeling Status
6. Conclusions
References
참고문헌 (58)
참고문헌 신청
W Woo / 2013 / Neutron diffraction measurements of residual stresses in friction stir welding: a review / Science and Technology of Welding and Joining 16(1):23~32
Jesper H. Hattel / 2015 / Modelling residual stresses in friction stir welding of Al alloys—a review of possibilities and future trends / The International Journal of Advanced Manufacturing Technology 76(9-12):1793~1805
Jian He / 2016 / Effect of tool rotational speed on residual stress, microstructure, and tensile properties of friction stir welded 6061-T6 aluminum alloy thick plate / The International Journal of Advanced Manufacturing Technology 84(9-12):1953~1961
C. C. Tutum / 2013 / Optimisation of process parameters in friction stir welding based on residual stress analysis: a feasibility study / Science and Technology of Welding and Joining 15(5):369~377
M. Peel / 2003 / Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds / Acta Materialia 51(16):4791~4801
Jesper H. Hattel / 2015 / Modelling residual stresses in friction stir welding of Al alloys—a review of possibilities and future trends / The International Journal of Advanced Manufacturing Technology 76(9-12):1793~1805
Jian He / 2016 / Effect of tool rotational speed on residual stress, microstructure, and tensile properties of friction stir welded 6061-T6 aluminum alloy thick plate / The International Journal of Advanced Manufacturing Technology 84(9-12):1953~1961
C. C. Tutum / 2013 / Optimisation of process parameters in friction stir welding based on residual stress analysis: a feasibility study / Science and Technology of Welding and Joining 15(5):369~377
M. Peel / 2003 / Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds / Acta Materialia 51(16):4791~4801
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Recent Advances in Friction-stir Welding Process and Microstructural Investigation of Friction Stir Welded Pure Titanium
대한용접·접합학회지
2017 .08
-
Post-weld heat treatment on friction stir welded AA6061-T6: microstructure and mechanical properties
한국소성가공학회 학술대회 논문집
2024 .10
-
T-Joining of AA6063 extrusion plates by Friction Stir Welding
대한용접학회 특별강연 및 학술발표대회 개요집
2020 .11
-
A356을 이용한 마찰교반용접 최적조건 연구
한국기계가공학회 춘추계학술대회 논문집
2017 .04
-
마찰교반용접 툴 개발 및 현황
대한용접학회 특별강연 및 학술발표대회 개요집
2022 .05
-
Effect of Processing Parameters and Post-weld Heat Treatment on the Mechanical Properties and Microstructural Evolution of Friction Stir Welded Al6061-T6
한국정밀공학회 학술발표대회 논문집
2020 .09
-
열탄소성 해석을 이용한 전기차 배터리 하우징 마찰교반용접에 관한 연구
한국기계기술학회지
2020 .01
-
Production and characterization of mechanical and microstructural behaviour of friction stir welded Al6063 composites reinforced with Gr/B4C/SiC particles
Journal of Ceramic Processing Research
2018 .02
-
Al 5083의 마찰교반용접 공정에 관한 연구
한국기계가공학회 춘추계학술대회 논문집
2020 .11
-
FSW용접에 의한 내마모강의 용접잔류응력해석
대한용접학회 특별강연 및 학술발표대회 개요집
2022 .05
-
Design and Manufacturing of Portable Friction Stir Welding Machine
유공압건설기계학회 학술대회논문집
2019 .06
-
Optimization of process parameters in friction stir welding of aluminium matrix SiC-Al2O3 composites by genetic algorithm
Journal of Ceramic Processing Research
2020 .01
-
Research Trend of FSW Technology of Aluminum Alloy
대한용접학회 특별강연 및 학술발표대회 개요집
2015 .05
-
A3004 알루미늄합금의 마찰교반점접합
대한용접학회 특별강연 및 학술발표대회 개요집
2017 .11
-
중첩된 알루미늄 5052 합금판재의 전기저항가열 마찰교반점용접에 관한 연구
소성·가공
2015 .08
-
Thermal and Frequency Response Analysis on Friction Stir Welding Tool with Different Materials by Using FEA Method
대한용접·접합학회지
2024 .08
-
알루미늄을 이용한 마찰교반용접 공정별 최적조건에 관한 연구
한국기계가공학회 춘추계학술대회 논문집
2016 .04
-
마이크로 마찰교반용접에서 백킹플레이트의 소재에 따른 온도 특성
한국생산제조학회 학술발표대회 논문집
2019 .11
-
Effect of post weld heat treatment on microstructure and mechanical properties of friction stir welded Cu-alloy joints
대한용접학회 특별강연 및 학술발표대회 개요집
2018 .11
-
Numerical Evaluation of Weld Pool Size, Distortion and Residual Stresses in Electron Beam Weld Joint of Thick SA312 Type 304 L Pipe and its Validation
대한용접·접합학회지
2025 .02
이 논문의 저자 정보
최근 본 자료
댓글(0)
0