지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.30 No.4
- 발행연도
- 2019.1
- 수록면
- 315 - 325 (11page)
이용수
초록· 키워드
오류제보하기
Double skin composite walls offer structural and economic merits over conventional reinforced concrete counterparts in terms of higher capacity, greater stiffness, and better ductility. This paper investigated the axial behavior of double skin composite walls with steel truss connectors. Full-scaled tests were conducted on three specimens with different height-to-thickness ratios. Test results were evaluated in terms of failure mode, load-axial displacement response, buckling loading, axial stiffness, ductility, strength index, load-lateral deflection, and strain distribution. The test data were compared with AISC 360 and Eurocode 4 and it was found that both codes provided conservative predictions on the safe side.
목차
등록된 정보가 없습니다.
참고문헌 (37)
참고문헌 신청
2016 / AISC 360-16, Specification for structural steel buildings; American Institute of Steel Construction
Akiyama, H. / 1991 / A compression and shear loading tests of concrete filled steel bearing wall / Transaction of 11th Structural Mechanics in Reactor Technology (SMiRT-11) 1
최병정 / 2009 / An experiment on compressive profile of the unstiffened steel plate-concrete structures under compression loading / Steel and Composite Structures, An International Journal 9(6):519~534
Choi, B. J. / 2014 / Strength and behavior of steel plate–concrete wall structures using ordinary and eco-oriented cement concrete under axial compression / Thin Wall. Struct 84:313~324
2004 / EN 1994-1-1:2004, Eurocode 4: Design of composite steeel and concrete structures-Part 1-1: General rules and rules for buildings; British Standards Institution
Akiyama, H. / 1991 / A compression and shear loading tests of concrete filled steel bearing wall / Transaction of 11th Structural Mechanics in Reactor Technology (SMiRT-11) 1
최병정 / 2009 / An experiment on compressive profile of the unstiffened steel plate-concrete structures under compression loading / Steel and Composite Structures, An International Journal 9(6):519~534
Choi, B. J. / 2014 / Strength and behavior of steel plate–concrete wall structures using ordinary and eco-oriented cement concrete under axial compression / Thin Wall. Struct 84:313~324
2004 / EN 1994-1-1:2004, Eurocode 4: Design of composite steeel and concrete structures-Part 1-1: General rules and rules for buildings; British Standards Institution
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Experimental compressive behavior of novel composite wall with different width-to-thickness ratios
Steel and Composite Structures, An International Journal
2020 .01
-
Behavior of L-shaped double-skin composite walls under compression and biaxial bending
Steel and Composite Structures, An International Journal
2020 .01
-
Effect of height-to-width ratio on composite wall under compression
Steel and Composite Structures, An International Journal
2020 .01
-
Eccentric compressive behavior of novel composite walls with T-section
Steel and Composite Structures, An International Journal
2020 .01
-
Compressive behavior of rectangular sandwich composite wall with different truss spacings
Steel and Composite Structures, An International Journal
2020 .01
-
Compressive behavior of profiled double skin composite wall
Steel and Composite Structures, An International Journal
2019 .01
-
Behavior and resistance of truss-type shear connector for composite steel-concrete beams
Steel and Composite Structures, An International Journal
2020 .01
-
Structural behavior of sandwich composite wall with truss connectors under compression
Steel and Composite Structures, An International Journal
2020 .01
-
Structural behavior of the stiffened double-skin profiled composite walls under compression
Steel and Composite Structures, An International Journal
2019 .01
-
Push out tests on various shear connectors used for cold-formed steel composite beam
Steel and Composite Structures, An International Journal
2022 .02
-
Numerical studies of steel-concrete-steel sandwich walls with J-hook connectors subjected to axial loads
Steel and Composite Structures, An International Journal
2016 .01
-
Structural Performance of Ferrocement Hollow Shear Walls Subjected to Lateral and Compressive Axial Loads
International Journal of Concrete Structures and Materials
2024 .09
-
Flexural performance of composite walls under out-of-plane loads
Steel and Composite Structures, An International Journal
2020 .01
-
Developments of double skin composite walls using novel enhanced C-channel connectors
Steel and Composite Structures, An International Journal
2019 .01
-
Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation
Steel and Composite Structures, An International Journal
2020 .01
-
Analytical Study of Force-Displacement Behavior and Ductility of Self-centering Segmental Concrete Columns
International Journal of Concrete Structures and Materials
2017 .09
-
Behavior of steel-concrete composite beam using angle shear connectors at fire condition
Steel and Composite Structures, An International Journal
2019 .01
-
Seismic behavior of cross-shaped concrete-filled steel tubular columns
Steel and Composite Structures, An International Journal
2021 .01
-
Experimental Investigation on Seismic Resistance of RC Shear Walls with CFRP Bars in Boundary Elements
International Journal of Concrete Structures and Materials
2020 .01
-
횡력저항 구조로서 더블월의 접합부에 대한 구조성능 평가
대한건축학회논문집
2020 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0