지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Steel and Composite Structures, An International Journal Steel and Composite Structures, An International Journal Vol.35 No.2
- 발행연도
- 2020.1
- 수록면
- 159 - 169 (11page)
이용수
초록· 키워드
오류제보하기
Sandwich composite wall consists of concrete core attached by two external steel faceplates. It combines the advantage of steel and concrete. The appropriate composite action between steel faceplate and concrete core is achieved by using adequate mechanical connectors. This research studied the compressive behavior of the sandwich composite walls using steel trusses to bond the steel faceplates to concrete infill. Four short specimens with different wall width and thickness of steel faceplate were designed and tested under axial compression. The test results were comprehensively evaluated in terms of failure modes, load versus axial and lateral deformation responses, resistance, stiffness, ductility, strength index, and strain distribution. The test results showed that all specimens exhibited high resistance and good ductility. Truss connectors offer better restraint to walls with thinner faceplates and smaller wall width. In addition, increasing faceplate thickness is more effective in improving the ultimate resistance and axial stiffness of the wall.
목차
등록된 정보가 없습니다.
참고문헌 (45)
참고문헌 신청
2016 / AISC 360-16, Specification for structural steel buildings / American Institute of Steel Construction
Akiyama, H. / 1991 / A compression and shear loading tests of concrete filled steel bearing wall / Transaction of 11th Structural Mechanics in Reactor Technology (SMiRT-11)
Amir Ayazi / 2019 / Steel–concrete composite shear walls using precast high performance fiber reinforced concrete panels / The Structural Design of Tall and Special Buildings 28(10):e1617
Farzad Ghaderi Bafti / 2019 / The length of plastic hinge area in the flanged reinforced concrete shear walls subjected to earthquake ground motions / Structural Engineering and Mechanics, An Int＇l Journal 69(6):651~665
Hamid Beiraghi / 2019 / Seismic response of dual structures comprised by Buckling-Restrained Braces (BRB) and RC walls / Structural Engineering and Mechanics, An Int＇l Journal 72(4):443~454
Akiyama, H. / 1991 / A compression and shear loading tests of concrete filled steel bearing wall / Transaction of 11th Structural Mechanics in Reactor Technology (SMiRT-11)
Amir Ayazi / 2019 / Steel–concrete composite shear walls using precast high performance fiber reinforced concrete panels / The Structural Design of Tall and Special Buildings 28(10):e1617
Farzad Ghaderi Bafti / 2019 / The length of plastic hinge area in the flanged reinforced concrete shear walls subjected to earthquake ground motions / Structural Engineering and Mechanics, An Int＇l Journal 69(6):651~665
Hamid Beiraghi / 2019 / Seismic response of dual structures comprised by Buckling-Restrained Braces (BRB) and RC walls / Structural Engineering and Mechanics, An Int＇l Journal 72(4):443~454
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Eccentric compressive behavior of novel composite walls with T-section
Steel and Composite Structures, An International Journal
2020 .01
-
Effect of height-to-width ratio on composite wall under compression
Steel and Composite Structures, An International Journal
2020 .01
-
Experimental compressive behavior of novel composite wall with different width-to-thickness ratios
Steel and Composite Structures, An International Journal
2020 .01
-
Developments of double skin composite walls using novel enhanced C-channel connectors
Steel and Composite Structures, An International Journal
2019 .01
-
Behavior of L-shaped double-skin composite walls under compression and biaxial bending
Steel and Composite Structures, An International Journal
2020 .01
-
Compressive behavior of rectangular sandwich composite wall with different truss spacings
Steel and Composite Structures, An International Journal
2020 .01
-
Height-thickness ratio on axial behavior of composite wall with truss connector
Steel and Composite Structures, An International Journal
2019 .01
-
Numerical studies of steel-concrete-steel sandwich walls with J-hook connectors subjected to axial loads
Steel and Composite Structures, An International Journal
2016 .01
-
Compressive behavior of profiled double skin composite wall
Steel and Composite Structures, An International Journal
2019 .01
-
Flexural performance of composite walls under out-of-plane loads
Steel and Composite Structures, An International Journal
2020 .01
-
Behavior of steel-concrete composite beam using angle shear connectors at fire condition
Steel and Composite Structures, An International Journal
2019 .01
-
Structural behavior of the stiffened double-skin profiled composite walls under compression
Steel and Composite Structures, An International Journal
2019 .01
-
Behavior and resistance of truss-type shear connector for composite steel-concrete beams
Steel and Composite Structures, An International Journal
2020 .01
-
Hysteretic performance of a novel composite wall panel consisted of a light-steel frame and aerated concrete blocks
Steel and Composite Structures, An International Journal
2021 .12
-
Ultimate strength behavior of steel-concrete-steel sandwich beams with ultra-lightweight cement composite, Part 2: Finite element analysis
Steel and Composite Structures, An International Journal
2015 .01
-
Behaviour and design of stainless steel shear connectors in composite beams
Steel and Composite Structures, An International Journal
2023 .01
-
Finite element model for interlayer behavior of double skin steel-concrete-steel sandwich structure with corrugated-strip shear connectors
Steel and Composite Structures, An International Journal
2018 .01
-
Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation
Steel and Composite Structures, An International Journal
2020 .01
-
Application of a newly puzzle shaped crestbond rib shear connector in composite beam using inverted T steel girder: An experimental study
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
Investigations of different steel layouts on the seismic behavior of transition steel-concrete composite connections
Advances in concrete construction
2019 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0