지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Smart Structures and Systems, An International Journal Smart Structures and Systems, An International Journal Vol.24 No.4
- 발행연도
- 2019.1
- 수록면
- 491 - 506 (16page)
이용수
초록· 키워드
오류제보하기
Literature regarding concrete walls reinforced by super elastic shape memory alloy (SMA) bars is rather limited. The seismic behavior of a system concurrently including a distinct steel reinforced concrete (RC) wall, as well as another wall reinforced by super elastic SMA at the first story, and steel rebar at upper stories, would be an interesting matter. In this paper, the seismic response of such a COMBINED system is compared to a conventional system with steel RC concrete walls ( STEEL-Rein.) and also to a wall system with SMA rebar at the first story and steel rebar at other stories ( SMA-Rein.). Nonlinear time history analysis at maximum considered earthquake (MCE) and design bases earthquake (DBE) levels is conducted and the main responses like maximum inter-story drift ratio and residual inter-story drift ratio are investigated. Furthermore, incremental dynamic analysis is used to accomplish probabilistic seismic studies by creating fragility curves. Results demonstrated that the SMA-Rein. system, subjected to DBE and MCE ground motions, has almost zero and 0.27% residual maximum inter-story drifts, while the values for the COMBINED system are 0.25% and 0.51%. Furthermore, fragility curves show that using SMA rebar at the base of all walls causes a larger probability of exceedance 3% inter-story drift limit state compared to the COMBINED system. Static push over analysis demonstrated that the strength of the COMBINED model is almost 0.35% larger than that of the two other models, and its general post-yielding stiffness is also approximately twice the corresponding stiffness of the two other models.
목차
등록된 정보가 없습니다.
참고문헌 (74)
참고문헌 신청
2014 / ACI 318-14, Building code requirements for structural concrete and commentary / ACI Committee 318
M. Shahria Alam / 2009 / Seismic performance of concrete frame structures reinforced with superelastic shape memory alloys / Smart Structures and Systems, An International Journal 5(5):565~585
American Concrete Institute(ACI) / 2013 / Guide for testing reinforced concrete structural elements under slowly applied simulated seismic loads / ACI committee 374. ACI 374.2R-13
Ferdinando Auricchio / 2016 / A Superelastic Shape-Memory-Alloy Beam Model / Journal of Intelligent Material Systems and Structures 8(6):489~501
Applied Technology Council / 2010 / ATC-72: Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings / ATC
M. Shahria Alam / 2009 / Seismic performance of concrete frame structures reinforced with superelastic shape memory alloys / Smart Structures and Systems, An International Journal 5(5):565~585
American Concrete Institute(ACI) / 2013 / Guide for testing reinforced concrete structural elements under slowly applied simulated seismic loads / ACI committee 374. ACI 374.2R-13
Ferdinando Auricchio / 2016 / A Superelastic Shape-Memory-Alloy Beam Model / Journal of Intelligent Material Systems and Structures 8(6):489~501
Applied Technology Council / 2010 / ATC-72: Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings / ATC
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Seismic response of RC structures rehabilitated with SMA under near-field earthquakes
Structural engineering and mechanics : An international journal
2017 .01
-
Cyclic performance of RC beam-column joints enhanced with superelastic SMA rebars
Computers and Concrete, An International Journal
2020 .01
-
Modified sigmoid based model and experimental analysis of shape memory alloy spring as variable stiffness actuator
Smart Structures and Systems, An International Journal
2019 .01
-
Self-centering passive base isolation system incorporating shape memory alloy wires for reduction in base drift
Smart Structures and Systems, An International Journal
2023 .05
-
Experimental and Analytical Studies for the Size Effect on the Axial Strength of High-Strength Concrete Walls with Various Fire-Damaged Areas
International Journal of Concrete Structures and Materials
2022 .09
-
Investigation the Seismic Performance of Post Tensioned Reinforced Concrete Shear Wall by Simulation Analysis
한국콘크리트학회 학술대회 논문집
2021 .11
-
단부 파쇄형 휨 보강에 따른 철근콘크리트 전단벽 휨 성능 평가
대한건축학회 논문집 - 구조계
2020 .04
-
Incremental dynamic analyses of concrete buildings reinforced with shape memory alloy
Steel and Composite Structures, An International Journal
2017 .01
-
Performance based assessment of shape memory alloy braces combined with buckling restrained braces in frames subjected to near field earthquakes
Steel and Composite Structures, An International Journal
2021 .11
-
An Estimate of the Yield Displacement of Coupled Walls for Seismic Design
International Journal of Concrete Structures and Materials
2017 .06
-
공동 주택의 구조벽과 비내력벽의 일체화 효과에 따른 내진 성능 분석
한국공간구조학회지
2019 .01
-
Seismic Response Analysis of Reinforced Concrete Wall Structure Using Macro Model
International Journal of Concrete Structures and Materials
2016 .03
-
Active Cooling System Using Shape Memory Alloy
대한기계학회 춘추학술대회
2022 .11
-
전통목구조 중깃 사용벽체의 면외방향 한계변형에 관한 연구
대한건축학회논문집
2020 .09
-
Shape Memory Alloys (SMA) based Smart Fabric for Haptics applications
대한기계학회 춘추학술대회
2023 .05
-
국내 고층 비내진 철근콘크리트 벽식 아파트의 지진취약도 평가
한국지진공학회 논문집
2020 .11
-
Seismic performance test and numerical simulation of prefabricated hydrophobic rock wool board-filled shear wall
Journal of Ceramic Processing Research
2022 .10
-
Prediction of shear strength and drift capacity of corroded reinforced concrete structural shear walls
Structural Engineering and Mechanics, An Int＇l Journal
2022 .07
-
폐열을 이용한 형상기억합금 발전기
한국생산제조학회 학술발표대회 논문집
2016 .11
-
Stiffness Degradation Induced by Seismic Loading on a RC Shear Wall
한국구조물진단유지관리공학회 논문집
2022 .06
이 논문의 저자 정보
최근 본 자료
댓글(0)
0