지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2021.1
- 수록면
- 500 - 513 (14page)
이용수
초록· 키워드
오류제보하기
For achieving good adhesion, full densification, and consequently, improving weakness in mechanical properties of aluminummatrix, the electroless coating, and cold–hot pressing have applied. Five Al-10 wt% Cu-10 wt% Ni/x (Al2O3–Ag)nanocomposites prepared by mixing for 6 h then fabricated by the cold pressing followed by hot pressing at different heatingtemperatures. Some properties of the fabricated samples include density, chemical composition, microstructure, hardness,toughness, wear rate, and wear behavior have characterized. No effect of alumina reinforcement on the densification hasobserved. New intermetallic such as Al3Ni2,Al3Ni,CuAl2,and Al3.892Cu6.1have formed at 630 °C. No cracks have propagatedas a result of penetrating the indenter during hardness tests that means good toughness for all nanocomposites. Thewear rate has decreased by increasing Al2O3content. It has observed that plastic deformation dissipated by increasing theAl2O3addition. The coefficient of thermal expansion gets enhanced by increasing the Al2O3range.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Understanding of microstructures and mechanical properties of thermal sprayed Ni-based coatings with Al and Mo addition
Journal of Advanced Marine Engineering and Technology (JAMET)
2022 .12
-
반응합성 코팅된 Ni-Al 금속간화합물의 미끄럼 마찰마모특성에 관한 연구
한국트라이볼로지학회 학술대회
2015 .10
-
금속-세라믹 코어-쉘 복합체에 담지된 Ni 금속 촉매를 적용한 CO₂ 메탄화 반응 특성연구
청정기술
2022 .06
-
Microstructure and Mechanical Characterization of Al2O3/Graphene Reinforced Al6061 Based Hybrid Nanocomposites
Metals and Materials International
2022 .02
-
습식 에칭 공정에서의 과산화수소 이상반응에 대한 안전 대책 및 제어에 관한 연구
한국산학기술학회 논문지
2018 .04
-
In-Situ Synthesis of Aluminum Matrix Composite from Al–NiO System by Mechanical Alloying
Metals and Materials International
2021 .01
-
Al-7Ni 도금된 보론강의 금속간화합물 형성
대한용접학회 특별강연 및 학술발표대회 개요집
2016 .11
-
열처리에 따른 Ni-25%Al 압분체의 연소합성 변화
한국정밀공학회 학술발표대회 논문집
2017 .05
-
Microstructure Evolution and Mechanical Performances of SiCf Reinforced (Al3Ti?+?Al3Ni)-Based Metallic?Intermetallic Laminate Composite
Metals and Materials International
2021 .10
-
Evaluation of Intermediate Phases Formed on the Bonding Interface of Hot Pressed Cu/Al Clad Materials
Metals and Materials International
2016 .01
-
Influence of Mo Addition on High Temperature Deformation Behavior of L1<sub>2</sub> Type Ni<sub>3</sub>Al Intermetallics
한국재료학회지
2016 .01
-
Influence of Varying Al/Ni Thicknesses Ratio on Reaction Behaviors and Mechanical Properties of Al/Ni Energetic Laminates
Metals and Materials International
2021 .11
-
Effect of ultrasonic on morphology and hardness of Ni-P-Al₂O₃ electroless composite coatings
한국표면공학회 학술발표회 초록집
2017 .11
-
보론 강의 Al 및 Al-10Si 용융도금 시 형성 된 금속간화합물의 핵생성 및 성장과정
대한용접학회 특별강연 및 학술발표대회 개요집
2018 .11
-
Thermal Stability of Precipitates in Al-2.8wt%Cu-1.4wt%Li Alloy
Metals and Materials International
2022 .12
-
알루미늄 기판 위 반응합성 Coating 된 Ni-Al계 금속간화합물의 미끄럼마모 특성 해석
Tribology and Lubricants
2018 .04
-
Microstructure and Tensile/Corrosion Properties Relationships of Directionally Solidified Al–Cu–Ni Alloys
Metals and Materials International
2018 .01
-
Evaluation of scratch resistant properties of electroless Ni-P-Al2O3 composite coatings
Journal of Ceramic Processing Research
2019 .01
-
대용량 저온 Ni-Al 합금 분말 제조 공정 개발
한국수소및신에너지학회논문집
2018 .02
-
Synthesis and Analysis of Nanocrystalline β1-Cu3Al and β2-NiAl Intermetallic- Reinforced Aluminum Matrix Composite by High Energy Ball Milling
Metals and Materials International
2017 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0