메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
Mohsen Mesbah (University of Malaya) Firouz Fadaeifard3 (University Putra Malaysia) Atefeh Karimzadeh (Iran University of Science and Technology) Bahman Nasiri-Tabrizi (Islamic Azad University) Alireza Rafieerad (University of Malaya) Ghader Faraji (University of Tehran) A. R. Bushroa (University of Malaya)
저널정보
대한금속·재료학회 Metals and Materials International Metals and Materials International Vol.22 No.6
발행연도
2016.1
수록면
1,098 - 1,107 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The production of the ultrafine-grained brass tubes was carried out by multi-pass parallel tubular channelangular pressing (PTCAP) as a severe plastic deformation process. In addition to that, the microstructuraland nano-mechanical features were investigated by EBSD and Nanoindentation for 0, 1, and 3 passes in acomparable mode. The elastic-plastic and micro scratch behavior were analyzed to show the enhanced features. Based on the obtained results, Young’s modulus and hardness of the specimens shifted to 1.62 and 1.7 times ofthe coarse-grained counterpart after the third pass respectively. The effects of the number of passes on the grainrefinement were also investigated to detect the applied changes through each step of the PTCAP experimental procedures. Moreover, based on the obtained results from EBSD, the grain size of 1 and 3 pass samples wererefined to 780 and 590 nm from its initial size of 75 μm. The fraction of the high-angle grain boundarieswas increased from 30% in pass 1 to 66% in pass 3 of the PTCAP process.

목차

등록된 정보가 없습니다.

참고문헌 (40)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0