메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Dong-Yun Jung (Electronics and Telecommunications Research Institute) Hyun-Gyu Jang (Electronics and Telecommunications Research Institute) Jong-Il Won (Electronics and Telecommunications Research Institute) Doo-Hyung Cho (Electronics and Telecommunications Research Institute) Sung-Kyu Kwon (Electronics and Telecommunications Research Institute) Seong-Hyun Lee (Electronics and Telecommunications Research Institute) Kun-Sik Park (Electronics and Telecommunications Research Institute) Jong-Won Lim (Electronics and Telecommunications Research Institute) Yong-Ha Lee (Y.TECH)
저널정보
대한전자공학회 JOURNAL OF SEMICONDUCTOR TECHNOLOGY AND SCIENCE Journal of Semiconductor Technology and Science Vol.22 No.1
발행연도
2022.2
수록면
1 - 9 (9page)
DOI
10.5573/JSTS.2022.22.1.1

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
A leadless surface mount package was developed to enhance the switching and heat-dissipation properties of a power semiconductor. The package was implemented through a low-temperature co-fired ceramic (LTCC)-based multilayer circuit substrate that could form embedded cavities. A silicon carbide (SiC) Schottky barrier diode (SBD) bare die was attached to the cavity in the LTCC substrate. Chip interconnection was realized using a wide and thick copper (Cu) clip with a low parasitic inductance and electrical resistance compared to those of a conventional wire. Silver-filled multiple vias and wide metal planes were used to reduce the electrical parasitic effects and enhance the heat-dissipation of the package. The DC and dynamic characteristics of the 600 V/10 A-class SiC SBD package involving the proposed technologies were evaluated. The dynamic test results indicated that the reverse recovery charge (Qrr) was 18.7% lower than that of a traditional TO-220 packaged product with the same bare die. Furthermore, two leadless commercial products and he proposed package prototype were applied to a power factor correction (PFC) converter, and the power loss and heat-dissipation performances were compared. The proposed package exhibited a lower loss and higher heat dissipation than those of the commercial products.

목차

Abstract
I. INTRODUCTION
II. PROPOSED PACKAGE
III. PFC CONVERTER INCLUDING THE PROPOSED PACKAGE
V. CONCLUSIONS
REFERENCES

참고문헌 (20)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-569-001061718