메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
윤대식 (한국에너지기술연구원) 안영수 (한국에너지기술연구원) 강기환 (한국에너지기술연구원) 장효식 (충남대학교) 이진석 (한국에너지기술연구원)
저널정보
한국태양에너지학회 한국태양에너지학회 논문집 한국태양에너지학회 논문집 제42권 제3호
발행연도
2022.6
수록면
1 - 11 (11page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
This paper describes the physical process used to recover silicon from a solar module, where the solar cell recovery rate (87.4 %) was determined under optimized process conditions. This physical recycling method requires a particle separation process because selective separation of the recovered materials is difficult, and the recovery rate and purity of the recovered materials can be low after the initial particle separation. In this study, the recovery rate was determined with respect to the crushing time and rotational speed of the cutter mill as well as the amplitude and separation time of the sieving machine, which were optimized to increase the Si recovery rate. In addition, an etching process was used to recover high-purity Si from the solar cells. To determine whether Ag and Al were removed from the recovered Si, XRD analysis was performed to confirm the measured Si peak and small TiO₂ peak, and ICP-MS analysis was performed to confirm the purity of the recovered Si, which was found to be of 3N grade.

목차

Abstract
1. 서론
2. 실험 방법
3. 결과 및 고찰
4. 결론
REFERENCES

참고문헌 (23)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0