지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국고분자학회 폴리머 폴리머 제46권 제4호
- 발행연도
- 2022.7
- 수록면
- 476 - 483 (8page)
- DOI
- 10.7317/pk.2022.46.4.476
이용수
초록· 키워드
오류제보하기
The tribological behavior of polypropylene polymer composites filled with Tin powder as fillers was studied using a pin-on-disc wear test rig at dry sliding conditions. The influence of wear process parameters like materials type (MT), applied load (AL), and sliding speed (SS) on the coefficient of friction (CoF) and specific wear rate (SWR) were investigated. A plan of experiments based on Taguchi technique performed to acquire data in a controlled way. An orthogonal array and analysis of variance (ANOVA) employed to investigate the influence of process parameters on the wear of these composites. The results showed that Tin powder"s addition as filler materials in polypropylene composites increased the specific wear resistance of the polypropylene composite significantly.
목차
Abstract
Introduction
Experimental
Results and Discussion
Conclusions
References
참고문헌 (24)
참고문헌 신청
Karolina, G.; Janusz, W. S.; Branislav, D. Effect of Mechanical Properties of Metal Powder Filled Hybrid Moulded Products. J. Polym. Eng. 2016, 36, 705-712.
Cho, M. H.; Bahadur, S.; Pogosian, A. K. Friction and Wear Studies Using Taguchi Method on Polyphenylene Sulfide Filled with a Complex Mixture of MoS2, Al2O3, and Other Compounds. Wear 2005, 1825-1835.
Mihai, R.; Nicoleta, S.; Daniela, R. Mechanical and Thermal Properties of Zinc Powder Filled High Density Polyethylene Composites. Polym. Test. 2001, 20, 409-417.
Chauhan, S. R.; Singh, Anoop, I.; Prashant Kumar, Effect of Fly Ash Content on Friction and Dry Sliding Wear Behavior of Glass Fiber Reinforced Polymer Composites-A Taguchi Approach. J. Miner. Mater. Char. Eng. 2010, 9, 365-387.
Khan, M. J.; Himanshu, G.; Shahid Saleem, S.; Wani, F. Effect of Material Hardness, Counter-Face Hardness and Load on the Tribological Properties of Virgin and Glass Filled PTFE Using Taguchi Approach. J. Phys. Conf. Ser. 2019, 1240, 012106.
Cho, M. H.; Bahadur, S.; Pogosian, A. K. Friction and Wear Studies Using Taguchi Method on Polyphenylene Sulfide Filled with a Complex Mixture of MoS2, Al2O3, and Other Compounds. Wear 2005, 1825-1835.
Mihai, R.; Nicoleta, S.; Daniela, R. Mechanical and Thermal Properties of Zinc Powder Filled High Density Polyethylene Composites. Polym. Test. 2001, 20, 409-417.
Chauhan, S. R.; Singh, Anoop, I.; Prashant Kumar, Effect of Fly Ash Content on Friction and Dry Sliding Wear Behavior of Glass Fiber Reinforced Polymer Composites-A Taguchi Approach. J. Miner. Mater. Char. Eng. 2010, 9, 365-387.
Khan, M. J.; Himanshu, G.; Shahid Saleem, S.; Wani, F. Effect of Material Hardness, Counter-Face Hardness and Load on the Tribological Properties of Virgin and Glass Filled PTFE Using Taguchi Approach. J. Phys. Conf. Ser. 2019, 1240, 012106.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Tribological and characterization studies of aluminium alloy 6061 reinforcement with aluminium oxide and copper metal matrix composites
Journal of Ceramic Processing Research
2022 .12
-
Evaluation of Mechanical and Thermal Properties of Novel Pulp Powder/Polypropylene Composites
한국고분자학회 학술대회 연구논문 초록집
2019 .04
-
Microstructure and Wear Resistance of in situ Porous TiO/Cu Composites
Metals and Materials International
2016 .01
-
폴리프로필렌의 트라이볼로지적 특성 향상을 위한마이크로 레이저 패턴 적용
Tribology and Lubricants
2024 .12
-
Effect of Rolling and Coiling Temperatures on Microstructure and Mechanical Properties of Medium-Carbon Pipeline Steel
Metals and Materials International
2020 .01
-
Multi objective optimization of wear characteristics on Al7075/Al2O3/B4C composites - Desirability approach
Journal of Ceramic Processing Research
2020 .01
-
Carbonaceous filler materials derived from organic precursors for polypropylene composites
한국고분자학회 학술대회 연구논문 초록집
2017 .10
-
Bio-inspired carbonaceous filler for polypropylene composites
한국고분자학회 학술대회 연구논문 초록집
2018 .04
-
미끄럼 속도변화에 따른 철강재료의 미끄럼 마모거동(중마모 거동에 미치는 연마모 도입시험의 영향)
Tribology and Lubricants
2020 .06
-
탄소섬유가 혼합된 세라믹 복합재 제동마찰재의 마찰·마모 특성
Tribology and Lubricants
2017 .02
-
가속 웨더링 인자에 따른 Polypropylene/talc 복합재의 기계물성 변화 연구
대한기계학회 춘추학술대회
2018 .12
-
실험계획법을 이용한 Al 합금의 마모 특성에 관한 연구
동력시스템공학회지
2021 .06
-
구형 입자에 의한 TiN 코팅된 실링면의 마멸해석
한국트라이볼로지학회 학술대회
2016 .04
-
다꾸지 기법을 이용한 디젤엔진용 실린더 라이너의 마찰특성에 관한 연구
대한기계학회 춘추학술대회
2015 .11
-
사출성형용 열가소성 펠렛을 이용한 탄소섬유 복합소재 제작에 관한 연구
소성·가공
2016 .12
-
폴리프로필렌 자기보강 복합재의 제조 공정에 따른 기계적 특성 평가
대한기계학회 춘추학술대회
2017 .04
-
Effect of Semi-Solid Heat Treatment on the Microstructure and Dry Sliding Wear Behavior of Al–20Si Alloy at Optimized Parametric Conditions
Metals and Materials International
2021 .01
-
Image Texture Description, Surface-Grains Structure Morphology and Prediction of Wear Parameters for Mg/B4C Composites Using Response Surface Methodology
Metals and Materials International
2022 .05
-
Abrasive Wear Behaviour of TiB2 Reinforced In?Situ Synthesized Magnesium RZ5 Alloy based Metal Matrix Composites
Metals and Materials International
2021 .09
-
상대재와 분위기에 따른 순철의 미끄럼 마멸 기구 분석
소성·가공
2017 .12
이 논문의 저자 정보
최근 본 자료
댓글(0)
0