메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
장윤혁 (경상국립대학교) 김갑순 (경상국립대학교)
저널정보
한국기계가공학회 한국기계가공학회지 한국기계가공학회지 제22권 제2호
발행연도
2023.2
수록면
51 - 58 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, a modal analysis of a high-speed processing machine capable of simultaneously machining the plane and side surfaces is performed to obtain the natural frequency. Moreover, the safety of the high-speed processing machine is described. The high-speed processing machine has four spindles: two spindles machine the plane, and the other two spindles machine the right and left sides of the workpiece. A modal analysis was performed on this high-speed processing machine to derive the results for the eight modes. Among them, the natural frequency of mode 1 (38.7 Hz), which was most suitable for this system, was selected. When the high-speed processing machine was fed at a speed of 40 m/min, the result of measuring the frequency used was 15.6 Hz, which is 2.47 times less than that of the modal analysis result. Therefore, a high-speed processing machine can be safely used by avoiding resonance.

목차

ABSTRACT
1. 서론
2. 고속가공기 구조 및 제원
3. 고속가공기의 모달해석
4. 고속가공기 진동 실험 및 고찰
5. 결론
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0