지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2023.4
- 수록면
- 100 - 106 (7page)
이용수
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
To achieve the safety assurance of the nuclear power plants, in-service inspection have were enforced periodic for nondestructive test in weldment. Among them, the ultrasonic evaluation is widely used for the measurement of the defects. Generally, non-destructive inspectors have calibrated a UT machine using the reference specimen in the artificial cracks such as EDM, mechanical notch. As the reflected ultrasonic signal of real crack was detected amplitude value 50% lower than artificial cracks. Therefore, domestic ultrasonic inspectors have a little experience in measuring actual cracks generated in the nuclear power plant field, such as SCC(Stress corrosion cracks, below SCC) and thermal fatigue cracking. Accordingly, in order to improve the inspection accuracy of non-destructive inspectors during operation inspection of nuclear power plant structures, it is necessary to have a lot of experience in inspecting actual cracks.
In this study, non-penetration SCC for using in educational specimen of the NDT inspector were fabricated by using the simulated nuclear environment system in base metal of STS 304 pipe. The size of the used pipe were 8 inch(80 sch., thickness 12.7mm). The end of the pipe was used a flange to simulating a fixed environment of the nuclear power plant structure. To accelerate the fabrication of SCC, a corrosive environment was composed by used a blending corrosion solution of the NaOH 1M and Na2S9-H2O 0.1M inside the pipe. The potential of hydrogen of the caustic solution was 14. The fabricated SCC was confirmed for crack size and shape by used UT and RT.
In this study, non-penetration SCC for using in educational specimen of the NDT inspector were fabricated by using the simulated nuclear environment system in base metal of STS 304 pipe. The size of the used pipe were 8 inch(80 sch., thickness 12.7mm). The end of the pipe was used a flange to simulating a fixed environment of the nuclear power plant structure. To accelerate the fabrication of SCC, a corrosive environment was composed by used a blending corrosion solution of the NaOH 1M and Na2S9-H2O 0.1M inside the pipe. The potential of hydrogen of the caustic solution was 14. The fabricated SCC was confirmed for crack size and shape by used UT and RT.
목차
Abstract
1. 서론
2. 실험방법
3. 실험 결과 및 토의
4. 결론
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
원전 가동중 검사를 위한 비파괴 검사용 실제 응력부식균열 시험편 제작
대한용접학회 특별강연 및 학술발표대회 개요집
2020 .11
-
굽힘 응력을 이용한 스테인리스 강의 응력부식균열 발생에 관한 연구
대한용접학회 특별강연 및 학술발표대회 개요집
2015 .05
-
원전 이종용접부 모사와 응력부식균열 제작 연구
대한용접학회 특별강연 및 학술발표대회 개요집
2015 .11
-
열피로 · 응력부식 균열 제작 및 비파괴 검사 평가
대한용접학회 특별강연 및 학술발표대회 개요집
2018 .11
-
A review of chloride induced stress corrosion cracking characterization in austenitic stainless steels using acoustic emission technique
Nuclear Engineering and Technology
2024 .02
-
Improvement of Chloride Induced Stress Corrosion Cracking Resistance of Welded 304L Stainless Steel by Ultrasonic Shot Peening
Corrosion Science and Technology
2024 .08
-
New test method for real-time measurement of SCC initiation of thin disk specimen in high-temperature primary water environment
Nuclear Engineering and Technology
2022 .12
-
원전 1차 계통수 모사환경에서 Type 304 스테인리스강의 응력부식균열개시 민감도
한국압력기기공학회 논문집
2024 .06
-
Evaluation of the Constraint Effect in Cracked Nuclear Pipes and Various Types of Fracture Test Specimens
한국정밀공학회 학술발표대회 논문집
2016 .10
-
SCC 시스템 관점에서의 센서성능 육성 방안
한국자동차공학회 추계학술대회 및 전시회
2019 .11
-
국부 유도 가열 방식을 이용한 1인치 이상 두께 용접 배관의 열피로균열 제작에 관한 연구
대한용접학회 특별강연 및 학술발표대회 개요집
2019 .11
-
Study on CO₂ Stress Corrosion Cracking accelerated test technique for development of flexible pipe for deep water
한국소성가공학회 학술대회 논문집
2024 .10
-
속도 교통표지판 정보를 이용한 SCC 시스템 설계
한국자동차공학회 춘계학술대회
2018 .06
-
Role of residual ferrites on crevice SCC of austenitic stainless steels in PWR water with high-dissolved oxygen
Nuclear Engineering and Technology
2020 .11
-
ACOUSTIC EMISSION CHARACTERISTICS OF STRESS CORROSION CRACKS IN A TYPE 304 STAINLESS STEEL TUBE
Nuclear Engineering and Technology
2015 .01
-
딥러닝 및 영상처리 기술을 활용한 콘크리트 균열 검출 방법
대한건축학회 논문집 - 구조계
2019 .11
-
Mechanical and durability properties of self-compacting concrete with blended binders
Computers and Concrete, An International Journal
2018 .01
-
건물 안전 진단을 위한 딥러닝 기반의 외벽 균열 검출 방법
대한설비관리학회지
2021 .12
-
원전 일차수응력부식균열 균열성장 시험설비 개선 연구
한국에너지학회 학술발표회
2017 .09
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0