레이저의 빔 품질(beam quality)을 나타내는 M²에 렌즈의 구면 수차가 미치는 영향을 조사하였다. 빔의 일부를 가려 빔의 직경을 변화시키기 위해 광속확대기를 이용하여 M²가 1.43인 연속발진 레이저 다이오드 빔의 직경을 확대하였다. 조리개를 사용하여 f = 5 cm인 평볼록 렌즈를 지나는 레이저빔의 직경을 2–10 mm 범위에서 변화시키면서, 직경에 따른 M²를 측정하였다. 레이저 빔의 직경이 증가하면 구면 수차의 영향으로 M²도 12.3까지 증가하였다. 레이저의 세기 분포가 M²에 미치는 영향을 관찰하기 위하여 투과도가 다양한 중성 감쇠 필터(neutral density filter)를 사용하여 레이저 빔의 일부를 가렸다. 가우시안 빔 분포를 가진 레이저 빔의 절반만 중성 감쇠 필터를 통과하게 하면서 M²의 변화를 관찰하였으며, 투과도가 감소할수록 M²는 증가하였다.
The effect of spherical aberration of the lens on M², which represents the beam quality of the laser, was investigated. In order to change the beam diameter by blocking part of the beam, a continuous wave laser diode beam with M2 of 1.45 was passed through a beam expander to expand the beam diameter. Using an aperture, the diameter of the laser beam passing through a plano-convex lens with f = 5 cm was varied in the range of 2 to 10 mm, and M² was measured according to the diameter. As the diameter of the laser beam increased, M² also increased to 12.3 due to the effect of spherical aberration. To observe the effect of laser intensity distribution on M², part of the laser beam was blocked using ND (neutral density) filters with various transmittances. The change in M² was observed while allowing only half of the laser beam with a Gaussian beam distribution to pass through the ND filter, and as the transmittance decreased, M² increased.