메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 창립 60주년 기념 춘계학술대회 강연 및 논문 초록집
발행연도
2005.5
수록면
2,410 - 2,414 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Methane reforming process using plasma/combustion phenomena has been investigated. The tested atmospheric pressure plasma generation techniques are corona discharge, DBD (Dielectric Barrier Discharge), spark, micro hollow-cathode, microwave torch plasma, and gliding arc. In these comparison tests, hydrogen is produced through direct methane decomposition process (CH₄→C+2H₂). The test results showed that none of the above plasma techniques is economically feasible because of the large operating power consumption. The power consumption, however, can be significantly decreased when hydrogen is produced by the partial oxidation process (CH₄+1/2 O₂→CO+2H₂). In the test of partial oxidation process, one of the most critical factors is O₂/C ratio. As O₂/C ratio increases up to 1, both methane conversion rate and hydrogen yield increase, which results in lower specific power consumption Detailed analysis showed that both plasma chemistry and heat released by combustion contribute to such effective syngas production process.

목차

Abstract
1. 서론
2. 플라즈마 발생기술 비교실험
3. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-016055698