메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한토목학회 대한토목학회 학술발표회 논문집 2007 대한토목학회 구조관련 합동 학술발표회
발행연도
2007.6
수록면
191 - 203 (13page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The purpose of this study is to evaluate the structural behavioral characteristics of precast segmental prestressed concrete that causes integration by transferring prestress after producing prestressed concrete girder and 5 segments placed by integration to correspond to the demands of construction cost, labor cost reduction, shortening of work term, and work quality. For this study, total of four 25m specimens with the same sections have been produced and load-deflection behavior has been compared and analyzed with the quantity of joint and tendon as variables. The monolithic specimen (PSG 1) is a specimen produced by integrating the entire girder using one structural steel form and the specimens (PSG2~PSG4) have the same design section as the monolithic specimen but are integrated with the production of girder into 5 segments. The application of a design method, different from the existing design method, that introduces incremental prestress has been applied to all the specimens performed in the test, and the behavioral differences between the specimen produced as a monolithic girder and the specimen produced as the precast prestressed concrete I-type girder have been studied experimentally.

목차

Abstract
1. INTRODUCTION
2. Reflection on Design Method
3. Test
4. Test Result and Analysis
5. Conclusion
6. Reference

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-531-019161729