메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
유용재 (군산대학교) 나의균 (군산대학교) 이동환 (전북대학교) 김훈 (전남대학교) 이종기 (호원대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2006년도 호남지부 추계학술대회 논문집
발행연도
2006.9
수록면
133 - 137 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The purpose of this study is to obtain the data that show AE signal characteristics and plastic deform zone from the Charpy-specimens with pre-crack during four point bending load. Among these signals, counts and signal strength are used to find out meaning of destructive mechanics by relation with plastic zone size. Plastic deformed zone size on the specimen surface was calculated. Relationships between plastic zone size and AE counts were investigated. Regardless of the specimens, as the plastic zone size at notch tip grows, cumulative AE counts increases until some distance. However, cumulative AE counts does not increase at severe plastic deformation zone. From these results, it can be concluded that plastic deformation does not have an affect on AE signals particularly. AE signals were absent within an elastic region, regardless of the specimens. Maximum signal strength of the weldment was the highest, followed by PWHT specimen and basemetal.

목차

Abstract
1. 서론
2. 실험방법
3. 실험결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-550-002491290