메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
유용재 (군산대학교) 나의균 (군산대학교) 고승기 (군산대학교) 백태현 (군산대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2006년도 제1차 재료 및 파괴부문 학술대회 논문집
발행연도
2006.3
수록면
269 - 273 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The purpose of this study is to find out the suitable test method to detect the AE signals at notch tip of the Charpy test specimens under bending tests and to evaluate the AE characteristics of the basemetal and weldment for SA-516 steel. Besides, micro-crack initiation region was chosen non-destructively and deformation behaviours were discussed from the viewpoint of the accumulated AE energy. In case of the Charpy sized specimens with small volume fraction, four point bend test is found to be the suitable test method to detect the AE signals at notch tip compared with the three point bending test. Regardless of the specimens like the basemetal and weldment, AE signals were absent within the elastic region at all and AE signals were produced from the region corresponding to the plastic deformation initiation point and micro-cracks were initiated at the mid-point between yield and maximum load. Deformation behaviours of the basemetal and weldment were different because of the differences of the micro-structure and mechanical properties at weld region.

목차

Abstract
1. 서론
2. 실험방법
3. 실험결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-550-002470848