메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Yong-Jae Eum (Pusan National University) Min-Cheol Lee (Pusan National University)
저널정보
제어로봇시스템학회 제어로봇시스템학회 국제학술대회 논문집 ICCAS 2008
발행연도
2008.10
수록면
1,789 - 1,792 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This research is carried out on protocol design of CAN for the acoustic emission diagnostic system (AEDS). We have been developing the AEDS which is used to examine whether the state of equipments is good or bad. The system must need unification through communication method because it consists of a monitoring unit and some diagnostic units. A monitoring unit is able to simultaneously control diagnostic units and to conveniently monitor all diagnostic units in a short time. All diagnostic units should handle diagnostic results of the inspection data that is measured by the acoustic emission sensor. Accordingly the system needs both a quite rapid response speed and unparalleled reliability and safety. The CAN is used in broad range of industry field as communication method and is applied to diverse application systems. The CAN is satisfied with these requirements at the AEDS. The CAN has enough response speed and high reliability and safety. Consequently, we have applied the CAN to the AEDS. The system has been improved an efficient protocol design of CAN.

목차

Abstract
1. INTRODUCTION
2. CONFIGURATIONS OF SYSTEM
3. PROTOCOL DESIGN
4. EVALUATION OF COMMUNICATION PERFORMANCE
5. CONCLUSIONS
6. ACKNOWLEDGEMENT
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-569-000985892