메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이홍주 (동국대학교) 채진웅 (동국대학교) 박정훈 (동국대학교)
저널정보
한국기후변화학회 한국기후변화학회지 Journal of Climate Change Research Vol.7 No.3
발행연도
2016.9
수록면
249 - 256 (8page)
DOI
10.15531/ksccr.2016.7.3.249

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Porous Al₂O₃ hollow fiber membranes were successfully prepared by dry-wet spinning/sintering method. The SEM image shows that the Al₂O₃ hollow fiber membrane consists mostly of sponge pore structure. The contact angle and the breakthrough pressure were 126 ° and 1.91 bar, respectively. This results indicate that the Al₂O₃ hollow fiber membranes were successfully modified to hydrophobic surface. The hydrophobic modified Al₂O₃ hollow fiber membranes were assembled into a membrane contactor system to separate CO₂ from a model gas mixture of the flue gas at elevated gas velocity. The CO₂ absorption flux was enhanced when the gas velocity increased from 1×10<SUP>-3</SUP> to 6×10<SUP>-3</SUP>m/s. Whereas the CO₂ absorption flux was decreased with the number of hollow fiber membrane of a module because of the concentration polarization. Furthermore, we developed an lab-scale Al₂O₃ hollow fiber membrane contactor modules and their system (i.e., CO₂ absorption using the Al₂O₃ membrane and monoethanolamine (MEA)) that could dispose of over 0.02 N㎥/h mixture gas (15% CO₂) with the removal efficiency higher than 95%. The results can be useful in a field of the membrane contactor for CO₂ separation, helping to design and extend a equipment.

목차

ABSTRACT
1. 서론
2. 이론 및 실험 방법
3. 결과 및 고찰
4. 결론
REFERENCES

참고문헌 (16)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-453-001413516