메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
이재형 (서울대학교) 이계병 (서울대학교) 송성진 (서울대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2016년도 학술대회
발행연도
2016.12
수록면
623 - 627 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
A research compressor at Seoul National University (SNU compressor) has been built to perform aerodynamic measurements of flow phenomenon occurring inside an axial compressor. The SNU compressor consists of four identical stages including an IGV row. It is an open-type compressor, which is powered by a 55 kW DC motor and a gearbox. Air passes through a bellmouth located the upstream of compressor section, and exits through a downstream throttle which is controlled by four linear actuators to control the flow rate. The SNU compressor uses steady and unsteady sensors such as 5-hole and hot-wire probes to measure the aerodynamic properties inside the compressor. Circumferential and radial measurements are possible by adopting linear traverses and gear system. Pitot probes, RTD sensors, and Kiel probes are installed at the upstream and downstream of compressor to measure the operating parameters with accuracies less than 0.43%.

목차

Abstract
1. 서론
2. 압축기의 구조
3. 센서 및 측정 장비
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-550-002056731