메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
원종명 (강원대학교) 조병욱 (강원대학교) 이용규 (강원대학교)
저널정보
한국펄프·종이공학회 펄프·종이기술 펄프·종이기술 제49권 제4호(통권 제177호)
발행연도
2017.8
수록면
65 - 73 (9page)
DOI
10.7584/JKTAPPI.2017.08.49.4.65

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The study on the pretreatment of PCC with PAM (polyacrylamide) was carried out as a part of solving the problem of decreasing the paper strength due to the increase of the filler usage. Anionic PAM was used for pretreatment of PCC, and the average particle size and specific surface area of PCC were measured by PAM dosage. A combination of anionic and cationic PAM was also applied to observe PCC particle size changes. Filler loading experiments were carried out using pretreated PCCs under selected conditions and the changes in paper properties were investigated. The PCC average particle size increased to 103.5 ㎛ as the anionic PAM dosage increased to 0.1%, then decreased, and the specific surface area of PCC showed the opposite. When using anionic and cationic PAM combinations, the average particle size of PCC was determined by the amount of anionic PAM. When PCC pretreated with 0.1% anionic PAM was used as a filler, the bulk, tensile index and burst index increased 3.3%, 4.89%, and 24.2%, respectively, while the ash content was increased by about 5%. Therefore, it is expected that PCC pretreatment using anionic PAM can be used as a useful means for improving paper properties.

목차

ABSTRACT
1. 서론
2. 재료 및 방법
3. 결과 및 고찰
4. 결론
Literature Cited

참고문헌 (15)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-586-001270744