메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이목영 (포항산업과학연구원) 김재중 (포스코)
저널정보
대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌 第37卷 第4號
발행연도
2019.8
수록면
293 - 298 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
In this study, over-lap joints were welded on thin sheet magnesium alloy using a CW high power fiber laser. The magnesium alloy sheet was 0.4mm thick AZ31B-O manufactured by strip casting and warm rolling. The surface of the magnesium alloy sheet was ground with sandpaper and cleaned with ethanol to remove the oxide layer and moisture. The laser welding conditions were a welding speed of 3~11m/min, 390~1,100W of laser output power and a defocus distance of δ=0mm. Laser weldment was characterized using the bead width of the upper and lower sheet center. The weld strength was measured by a hydraulic fatigue machine with a U type grip. The failure modes showed interfacial, HAZ and weld metal failures. Consequently, bead width was varied between 0.5~0.7mm, and at optimum welding conditions peak load was more than 40N/mm. But solidification cracks formed in the crater because of weld metal shrinkage or limited weld metal thickness.

목차

Abstract
1. 서론
2. 실험방법
3. 결과 및 고찰
4. 결론
References

참고문헌 (10)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-581-000961301