지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2019.10
- 수록면
- 247 - 256 (10page)
이용수
초록· 키워드
오류제보하기
In this study, the development of annealing textures in cold rolled and annealed tantalum sheets was analyzed using electron backscatter diffraction. At 900˚C, the textures of the recrystallized grains in the partially and completely recrystallized microstructures displayed significant similarities. The average diameter of the recrystallized grains with γ-fiber orientations exceeded that of grains with different orientations, and the average growth rates were unrelated to the orientations after an initial stage of recrystallization. Additional cold rolling and annealing was done for controlled initial microstructures and textures inherited from various processes of prior cold rolling and annealing. This second cycle of the process resulted in stronger textures with major γ-fiber orientations as a result of the enhanced γ-fiber orientations in the preceding textures. A coarse-grained prior microstructure resulted in a weaker annealing texture than a fine grained one regardless of the stronger previous texture, which was occasioned by the sub-structures of the minor orientations at local deformation inhomogeneities such as sharp in-grain shear bands.
목차
Abstract
1. 서론
2. 실험방법
3. 결과
4. 고찰
5. 결론
REFERENCES
참고문헌 (34)
참고문헌 신청
V. Randle, O. Engler, 2000, Introduction to Texture Analysis Macrotexture, Microtexture and Orientation Mapping, CRC Press LLC, Florida.
F. J. Humphreys, M. Hatherly, 2004, Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier Ltd., Oxford, UK.
R. K. Ray, J. J. Jonas, R. E. Hook, 1994, Cold rolling and annealing textures in low carbon and extra low carbon steels, Int. Mater. Rev. Vol. 39, No. 4, pp. 129- 172.
J. F. Held, 1965, Proc. Mechanical Working and Steel Processing IV (ed. D. A. Edgecombe), Am. Inst. Mining, Metallurgical and Petroleum Engineers, New York, p. 3.
N. P. Goss, 1935, New development in electrical strip steels characterized by fine grain structure approaching the properties of a single crystal, Trans. Am. Soc. Met. Vol. 23, pp. 511-531.
F. J. Humphreys, M. Hatherly, 2004, Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier Ltd., Oxford, UK.
R. K. Ray, J. J. Jonas, R. E. Hook, 1994, Cold rolling and annealing textures in low carbon and extra low carbon steels, Int. Mater. Rev. Vol. 39, No. 4, pp. 129- 172.
J. F. Held, 1965, Proc. Mechanical Working and Steel Processing IV (ed. D. A. Edgecombe), Am. Inst. Mining, Metallurgical and Petroleum Engineers, New York, p. 3.
N. P. Goss, 1935, New development in electrical strip steels characterized by fine grain structure approaching the properties of a single crystal, Trans. Am. Soc. Met. Vol. 23, pp. 511-531.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Texture Adjustment of Hot-Rolled Fe-1.6wt% Si Non-oriented Electrical Steel Sheet by Annealing Processes
Metals and Materials International
2022 .11
-
탄탈륨 집합조직 발달에 대한 교차압연의 영향
열처리공학회지
2018 .01
-
Effects of Grain Boundary on {100} Recrystallization Texture of High Silicon Electrical Steel
Metals and Materials International
2018 .01
-
Deformation and Annealing Textures of Surface Layers of Copper Sheets Cold-Rolled Under Unlubricated Condition
Metals and Materials International
2017 .01
-
Development of Grain Boundary Character Distribution in Medium‑Strained 316L Stainless Steel During Annealing
Metals and Materials International
2019 .01
-
EBSD analyses of ultrafine-grained 0.18 wt.%C steel subjected to differential-speed rolling and static-recrystallization
한국소성가공학회 학술대회 논문집
2021 .05
-
Effect of Sb and Initial Annealing on the Microstructure, Texture, and Magnetic Behavior of Low Silicon Steel Produced by Single-Roll Drive Rolling
Metals and Materials International
2023 .06
-
Al-4.0%Zn-1.5%Mg-0.9%Cu 합금의 압출, 압연 및 열처리에 따른 미세조직 변화
열처리공학회지
2018 .01
-
A Brief Review of Some Challenging Issues in Textured Piezoceramics via Templated Grain Growth Method
센서학회지
2023 .01
-
Grain Refinement of CoNiCrMo Non-equiatomic Medium Entropy Alloy
Metals and Materials International
2023 .01
-
주조 후 냉간 압연된 Al-6.5Mg-1.5Zn계 합금의 어닐링 특성
한국재료학회지
2018 .01
-
비대칭 압연과 열처리한 Cu 판의 집합조직과 소성변형비 변화 (Ⅰ)
소성·가공
2019 .12
-
Recrystallization and texture evolution of Ca, Y-added magnesium alloy sheets
한국소성가공학회 학술대회 논문집
2019 .10
-
Investigation on Texture Evolution and Recrystallization Aspects of Novel Mg?Zn?Gd?Y?Nd Alloys
Metals and Materials International
2021 .10
-
Microstructure and Texture Evolution of Rolled Plate for Cu?15Cr In-Situ Composite
Metals and Materials International
2021 .11
-
AZ31 마그네슘 합금의 어닐링 이후 내부마찰 거동
동력시스템공학회지
2018 .02
-
Effect of Asymmetric Rolling on the Microstructure, Mechanical Properties and Texture Evolution of Mg–8Li–3Al–1Y Alloy
Metals and Materials International
2019 .01
-
방향성 전기강판에서 1차 재결정시 Si 함량과 냉간압연 횟수, 승온 속도에 따른 집합조직 발달
열처리공학회지
2018 .01
-
열처리조건에 따른 AZ61 마그네슘 합금의 미세조직과 감쇠능에 미치는 영향
열처리공학회지
2018 .01
-
Effect of Asymmetric Hot Rolling on the Texture Evolution of Fe–3%Si Steel
Metals and Materials International
2018 .01
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2019-551-001231219