지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2019.1
- 수록면
- 364 - 371 (8page)
이용수
초록· 키워드
오류제보하기
A medium-strained (13% cold-drawing) 316L austenitic stainless steel rod was subjected to annealing between 750 and1100 °C. Electron backscatter diffraction and electron channeling contrast imaging techniques were jointly employed toinvestigate the development of microstructures and grain boundary character distribution during the annealing treatments. Results show that annealing at temperatures below 900 °C does not evidently change microstructures of the as-drawn specimen. Full recrystallization is observed after the temperature reaches 1000 °C and the deformation microstructures are replacedby fine and uniform recrystallized grains. A large number of annealing twins (with Σ3 misorientation) are produced by therecrystallization, leading to markedly increased fractions of special boundaries (fSB). The maximum fSB is found to be 67.3%in the present study. In addition, for the recrystallized grains, rapid growth is noticed at relatively high temperatures due toeasy migration of grain boundaries.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
탄탈륨 판재의 어닐링 집합조직과 결정립 크기
소성·가공
2019 .10
-
밀어닐링 온도가 Ti-6Al-4V 합금의 미세조직 및 경도에 미치는 영향
열처리공학회지
2019 .01
-
Effects of Grain Boundary on {100} Recrystallization Texture of High Silicon Electrical Steel
Metals and Materials International
2018 .01
-
Grain Refinement of CoNiCrMo Non-equiatomic Medium Entropy Alloy
Metals and Materials International
2023 .01
-
Effect of Calcium on the Rate of Grain Boundary Migration in Pure Magnesium During Annealing
Metals and Materials International
2024 .07
-
열처리조건에 따른 AZ61 마그네슘 합금의 미세조직과 감쇠능에 미치는 영향
열처리공학회지
2018 .01
-
Texture Adjustment of Hot-Rolled Fe-1.6wt% Si Non-oriented Electrical Steel Sheet by Annealing Processes
Metals and Materials International
2022 .11
-
Study on Recrystallization Kinetics and Mechanical Properties of Low Carbon Steel During High Temperature Annealing
대한설비공학회 학술발표대회논문집
2023 .11
-
Nucleation Mechanism of Discontinuous Dynamic Recrystallization with Restrained Grain Boundary Sliding
Metals and Materials International
2021 .12
-
Hot Tensile Deformation Behavior of Twin Roll Casted 7075 Aluminum Alloy
Metals and Materials International
2015 .01
-
Ni-25at.%Al 금속간화합물의 연소합성반응에 미치는 사전 Annealing 처리의 영향
Tribology and Lubricants
2021 .04
-
Effect of Sb and Initial Annealing on the Microstructure, Texture, and Magnetic Behavior of Low Silicon Steel Produced by Single-Roll Drive Rolling
Metals and Materials International
2023 .06
-
On the Reversion and Recrystallization of Austenite in the Interstitially Alloyed Ni-Free Nano/Ultrafi ne Grained Austenitic Stainless Steels
Metals and Materials International
2019 .01
-
Misorientation Characteristics at the Growth Front of Abnormally-Growing Goss Grains in Fe?3%Si Steel
Metals and Materials International
2021 .12
-
Effect of serrated grain boundary on stress corrosion cracking of Alloy 600
Nuclear Engineering and Technology
2018 .01
-
Bimodal-Structured Al?Mg Alloy with High Strength and Ductility Processed by High Strain Rate Rolling at Medium Temperature
Metals and Materials International
2021 .12
-
냉간 성형시 미세조직에 따른 저탄소강의 이상 결정립 거동 연구
한국소성가공학회 학술대회 논문집
2022 .12
-
Grain size effect on tensile and wire drawing behaviors in twinning-induced plasticity steel
대한기계학회 춘추학술대회
2021 .11
-
유역분할 알고리즘을 이용한 결정립 크기 측정
한국표면공학회지
2022 .12
-
EBSD analyses of ultrafine-grained 0.18 wt.%C steel subjected to differential-speed rolling and static-recrystallization
한국소성가공학회 학술대회 논문집
2021 .05
이 논문의 저자 정보
최근 본 자료
댓글(0)
0