지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2022.11
- 수록면
- 2,849 - 2,862 (14page)
- DOI
- 10.1007/s12540-022-01175-y
이용수
초록· 키워드
오류제보하기
In the present work, the effect of pre-annealing on the recrystallized texture of hot-rolled Fe-1.6 wt% Si non-oriented electricalsteel was investigated. Vickers hardness test, optical microscope, and electron backscatter diffraction were used to investigatethe changes in the average hardness, microstructure, and texture caused by pre-annealing of hot-rolled strips. It was found thatthe texture successively changed from a near-random distribution to {116} < 151 > texture and near-{001} < 140 > texturedepending on pre-annealing treatments. Also, there was almost no effect on the grain size, and the average grain size of thenormalized bands was 125 μm. Besides, the texture and magnetic properties of the final products under different pre-annealingtreatments were also detected. It was found that the sample obtain a strong Cube texture by pre-annealing. Meanwhile, themagnetic properties are also got an improvement by pre-annealing. In a word, this method may provide a possibility to obtainan ideal grain size and texture simultaneously.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
탄탈륨 판재의 어닐링 집합조직과 결정립 크기
소성·가공
2019 .10
-
Effect of Asymmetric Hot Rolling on the Texture Evolution of Fe–3%Si Steel
Metals and Materials International
2018 .01
-
Effects of Process Variables in Decarburization Annealing of Fe-3%Si-0.3%C Steel Sheet on Textures and Magnetic Properties
Metals and Materials International
2017 .01
-
A Brief Review of Some Challenging Issues in Textured Piezoceramics via Templated Grain Growth Method
센서학회지
2023 .01
-
Effect of Sb and Initial Annealing on the Microstructure, Texture, and Magnetic Behavior of Low Silicon Steel Produced by Single-Roll Drive Rolling
Metals and Materials International
2023 .06
-
비대칭 압연과 열처리한 Cu 판의 집합조직과 소성변형비 변화 (Ⅰ)
소성·가공
2019 .12
-
Deformation and Annealing Textures of Surface Layers of Copper Sheets Cold-Rolled Under Unlubricated Condition
Metals and Materials International
2017 .01
-
Development of Grain Boundary Character Distribution in Medium‑Strained 316L Stainless Steel During Annealing
Metals and Materials International
2019 .01
-
주조 후 냉간 압연된 Al-6.5Mg-1.5Zn계 합금의 어닐링 특성
한국재료학회지
2018 .01
-
Effects of Grain Boundary on {100} Recrystallization Texture of High Silicon Electrical Steel
Metals and Materials International
2018 .01
-
EBSD analyses of ultrafine-grained 0.18 wt.%C steel subjected to differential-speed rolling and static-recrystallization
한국소성가공학회 학술대회 논문집
2021 .05
-
Ni-25at.%Al 금속간화합물의 연소합성반응에 미치는 사전 Annealing 처리의 영향
Tribology and Lubricants
2021 .04
-
A study on Structural Design and Operational Analysis on micro-rolling based texturing for needle surface
한국생산제조학회 학술발표대회 논문집
2015 .04
-
밀어닐링 온도가 Ti-6Al-4V 합금의 미세조직 및 경도에 미치는 영향
열처리공학회지
2019 .01
-
Microstructure and Texture Evolution of Rolled Plate for Cu?15Cr In-Situ Composite
Metals and Materials International
2021 .11
-
3 차원 축 대칭 형상 적층제조를 이용한 Texturing 생성
한국정밀공학회 학술발표대회 논문집
2023 .05
-
Effect of twins and shear band on the development of texture in HEA during cold rolling and annealing process
한국소성가공학회 학술대회 논문집
2022 .05
-
Effect of twins and shear band on the development of texture in HEA during cold rolling and annealing process
한국소성가공학회 학술대회 논문집
2022 .05
-
Al 소재의 annealing 처리에 따른 반사율 분석
한국생산제조학회 학술발표대회 논문집
2022 .12
-
열처리조건에 따른 AZ61 마그네슘 합금의 미세조직과 감쇠능에 미치는 영향
열처리공학회지
2018 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0