지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 동향자료
- 저자정보
- 발행연도
- 2008.1
- 수록면
- 105 - 107 (3page)
이용수
초록· 키워드
오류제보하기
In this work, we employed an electroless nickel plating on glass fibers in order to enhance the electric conductivity of fibers. And the effects of metal content and plating time on the conductivity of fibers were investigated. From the results, island-like metal clusters were found on the fiber surfaces in initial plating state, and perfect metallic layers were observed after 10 min of plating time. The thickness of metallic layers on fiber surfaces was proportion to plating time, and the electric conductivity showed similar trends. The nickel cluster sizes on fibers decreased with increasing plating time, indicating that surface energetics of the fibers could become more homogeneous and make well-packed metallic layers, resulting in the high conductivity of Ni/glass fibers.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Fiber surface and electrical conductivity of electroless Ni-plated PET ultra-fine fibers
Carbon letters
2013 .01
-
난기류 혼합법을 이용한 목섬유-열가소성 섬유 복합재에 관한 연구(I) - 공정변수가 복합재의 물리적 성질에 미치는 영향 -
목재공학(Journal of the Korean Wood Science and Technology)
1996 .01
-
난기류 혼합법을 이용한 목섬유-열가소성 섬유 복합재에 관한 연구(II) - 공정변수가 복합재의 기계적 성질에 미치는 영향 -
목재공학(Journal of the Korean Wood Science and Technology)
1997 .01
-
Conversion of Carbon Fiber into Silicon Carbide Fiber by Pack-Cementation
Carbon science
2000 .01
-
Carbon Fibers (I): General Understanding and Manufacturing Techniques of Carbon Fibers
Carbon letters
2008 .01
-
Evaluation of The Moment Resistance Joint Strength of Larch Glulam Using Glass Fiber Reinforced Wood Plate
목재공학(Journal of the Korean Wood Science and Technology)
2014 .01
-
Introduction of modified methods of preparing fiber cross sections for the comparison of fibers
한국분석과학회 학술대회
2018 .11
-
Studies on Nanoscaled Ni-P Plating of Carbon Fiber Surfaces in a Composite System
Carbon science
2002 .01
-
SOME PROPERTIES OF FIBER PRODUCTS OF THREE MODULES
호남수학학술지
2010 .01
-
Dietary Fiber의 분석방법에 관한 고찰
한국영양학회지
1992 .02
-
Development and Evaluation of Turbulent Air Mixing Process for Manufacturing Wood Fiber and Thermoplastic Fiber Composites
목재공학(Journal of the Korean Wood Science and Technology)
1998 .01
-
유리섬유 보강적층재의 파괴인성 특성
목재공학(Journal of the Korean Wood Science and Technology)
2015 .01
-
목질(木質)과 비목질계(非木質系) 섬유(纖維)를 활용한 복합재(複合材) 연구(硏究) - 폴리프로필렌의 섬유장(纖維長)과 공정변수(工程變數)의 영향(影響)을 중심(中心)으로 -
목재공학(Journal of the Korean Wood Science and Technology)
1997 .01
-
Influence of Nickel Electroplating on Hydrogen Chloride Removal of Activated Carbon Fibers
Carbon science
2004 .01
-
Manufacturing and characteristics of PAN-based composite carbon fibers containing cellulose particles
Carbon letters
2015 .01
-
Variable Optical Fiber Attenuator Using Bending - Sensitive Fiber
Current Optics and Photonics
2004 .06
-
Mechanical Properties and Oxidation Behaviors of Boron Oxide Implanted Carbon Fibers
Carbon science
2000 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0