메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한기계학회 Journal of Mechanical Science and Technology Journal of Mechanical Science and Technology Vol.20 No.12
발행연도
2006.12
수록면
2,052 - 2,060 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The wear of engine valve and seat insert is one of the most important factors which affect engine performance. Because of higher demands on performance and the increasing use of alternative fuel, engine valve and seat insert are challenged with greater wear problems than in the past. In order to solve the above problems, a simulator was developed to be able to generate and control high temperatures and various speeds during motion. The wear simulator is considered to be a valid simulation of the engine valve and seat insert wear process with various speeds during engine activity. This work focuses on the different degrees of wear at three different singular test speeds (10 ㎐, 25 ㎐ & multi-㎐). For this study, the temperature of the outer surface of the seat insert was controlled at 350℃, and the test load was 1960 N. The test cycle number was 6.0×10?. The mean (±standard error) wear depth of the valve at 10 ㎐ and 25 ㎐ was 45.1 (±3.7) ㎛ and 81.7 (±2.5) ㎛, respectively. The mean wear depth of the seat insert at 10 ㎐ and 25 ㎐ was 52.7 (±3.9) ㎛ and 91.2 (±2.7) ㎛, respectively. In the case of multi-㎐ it was 70.7 (±2.4) ㎛ and 77.4 (±3.8) ㎛, respectively. It was found that higher speed (25 ㎐) cause a greater degree of wear than lower speed (10 ㎐) under identical test condition (temperature, valve displacement, cycle number and test load). In the wear mechanisms of valves, adhesive wear, shear strain and abrasive wear could be observed. Also, in the wear mechanisms of seat inserts, adhesive wear, surface fatigue wear and abrasive wear could be observed.

목차

1. Introduction
2. Test Device (simulator)
3. Test Method
4. Test Result
5. Discussion and Conclusion
References

참고문헌 (10)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-017531955