메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국생산제조학회 한국생산제조학회 학술발표대회 논문집 한국공작기계학회 2007 춘계학술대회 논문집
발행연도
2007.5
수록면
733 - 738 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Cold-roll-forming (CRF) is a well known process used to manufacture long sheet metal products with a constant cross section. It can manufacture goods of the uniform cross section on a large scale as a continuous processing. Also it is a very important process in many industrial fields to increase of the application. However, product design procedures, in terms of rolls design and rolls pass schedule, remain rather an art than science. Therefore, many times and money are needed for manufacturing goods. In order to overcome this difficulty, a new computational method based on the rigid-plastic finite method is developed for the analysis of roll forming process and the optimum design. Analysis using FEM(Finite Element Method) and FDM(Finite Difference Method) is used in the deformation analysis.
In this paper, to make lower member for under rail roll using FEM simulation software(SHAPE-RF), the roll forming 3-D modeling and simulation are performed, Tensile test is performed about SCP-1 for input properties to program. Besides, curve fitting is executed to set up the flow stress equation. Final shape is predicted after 11-pass. The longitudinal strain is estimated on the basis of simulation result. In addition, Bow and Camber which is one of the several defects are measured.

목차

Abstract
1. 서론
2. 롤 포밍에서의 주요 인자
3. 공정 해석 조건
4. 롤 포밍 공정의 모델링
5. 해석 결과 및 고찰
6. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-552-016172283