메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국자동차공학회 한국자동차공학회 학술강연 초록집 한국자동차공학회 1994년 학술강연초록집(기관)
발행연도
1994.11
수록면
101 - 109 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper presents a new approach for the allowable limit of oil aeration rate not to be detrimental to the engine bearing reliability. This approach is based on the measurement of minimum oil film thicknesses(MOFTs) of bearings and crankshaft temperatures according to the change of oil aeration rate. Oil is liable to be aerated under high speed conering condition and it results in. the main gallezy oil pressure drop. This level of oil aeration is duplicated in an engine dyno test by the use of a special air injection device and monitored with on-line aeration measurement system. Bearing reliability is evaluated by the measured results of MOFTs in bearings and the surface temperatures of crankshaft, and especially linkage system was used for measuring MOFT in a connecting rod bearing. Consequently, oil aeration rate lower than 30% (under the any main gallezy oil pressure) is verified to be allowable to maintain oil film in a bearing. Based on this guideline, the problem of connecting rod bearing failure occurred during high speed cornering of a vehicle can be improved by the modification of oil pan and strainer.

목차

Abstract

1.서론

2.배경

3.실험

4.결과 및 검토

5.결론

6.참고 문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-556-014128163