메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한용접·접합학회 대한용접·접합학회지 대한용접학회지 제23권 제3호
발행연도
2005.6
수록면
61 - 67 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Since lead (Pb)-free solders for electronics have higher melting points than that of eutectic Sn-Pb solder, they need higher soldering temperatures. In order to decrease the soldering temperature we tried to coat Sn-Bi layer on Sn-3.5%Ag solder by electroplating, with applies the mechanism of transient liquid phase bonding to soldering. During heating Bi will diffuse into the Sn-3.5Ag solder and this results in decreasing soldering temperature. As bonding samples, the 1608 capacitor electroplated with Sn, and PCB, its surface was finished with electroless-plated Ni/Au, were selected. The Sn-95.7%Bi coated Sn-3.5Ag was supplied as a solder between the capacitor and PCB land. The samples were reflowed at 220℃, which was lower than that of normal reflow temperature, 240~250℃, for the Pb-free. As experimental result, the joint of Sn-95.7%Bi coated Sn-3.5Ag showed high shear strength. In the as-reflowed state, the shear strength of the coated solder showed 58.8N, whereas those of commercial ones were 37.2N (Sn-37Pb), 31.4N (Sn-3Ag-0.5Cu), and 40.2N (Sn-8Zn-3Bi). After thermal shock of 1000 cycles between -40℃ and +125℃N and 45.1N. As the microstructures, in the solder Ag₃Sn intermetallic compound (IMC), and along the bonded interface Ni₃Sn₄ IMC were observed.

목차

Abstract

1. 서론

2. 실험방법

3. 실험결과 및 고찰

4. 결론

감사의 글

참고문헌

참고문헌 (13)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-581-017742319