메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국생산제조학회 한국생산제조학회 학술발표대회 논문집 한국공작기계학회 2007 춘계학술대회 논문집
발행연도
2007.5
수록면
759 - 764 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Ti-AI-Si-N and coatings were deposited on WC-Co substrates by a DC magnetron sputtering method. The oxidation behavior of two kinds of Ti0.75Al0.25N and Ti0.69Al0.23Si0.08N coatings were comparatively investigated by XRD patterns and GDOES depth profiles. Si addition of8 at.% into Ti-Al-N film modified its microstructure to a fine composite comprising, Ti-Al-N crystallites and amorphous Si3N4, and to a smoother surface morphology. While the solid solution Ti0.75Al0.25N film had superior oxidation resistance up to around 700?, the composite Ti-Al-Si-N film showed further enhanced oxidation resistance. Both Al2O3 and SiO2layers played roles as a barrier against oxygen diffusion for the quaternary Ti-Al-Si-N film, whereas only the Al2O3 oxide layer formed at surface did a role for the Ti-Al-N film. The cutting performances of two coated carbide ball-end mills were evaluated by cutting of AISI D2 cold-worked die steel (60 HRC) under high-speed cutting condition. The tool wear and cutting temperature are discussed along with coating characteristics. A K-type thermocouple, implanted in a hole in the work-piece for cutting temperature measurement, was introduced in this work.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 실험결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-552-016172329