메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
오세철 (한국기계연구원) 오준호 (전북대학교) 장형준 (한국기계연구원) 이석환 (한국기계연구원) 이선엽 (한국기계연구원) 김창기 (한국기계연구원) 이정우 (전북대학교)
저널정보
한국자동차공학회 한국자동차공학회논문집 한국자동차공학회논문집 제31권 제1호
발행연도
2023.1
수록면
61 - 70 (10page)
DOI
10.7467/KSAE.2023.31.1.061

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
It is important to make better premixed combustion engines to reduce harmful engine emissions, such as nitrogen oxides(NOx) and smoke, by enhancing thermal efficiency in the internal combustion engines(ICEs). Specifically, since diesel compression ignition(CI) engines are based on the auto-ignition function of diesel fuel in the co-existence of some premixed combustion and most of diffusive flame, homogeneity between air and fuel must be improved. To solve this problem, multi-holes and narrow injection angles for the diesel injector are recommended. If the number of holes in the injector is increased, it could help air utilization and shorten diesel spray penetration. Also, a narrow injection angle could help reduce wall impingement of the diesel spray, when the diesel injection timing is advanced, compared to conventional conditions. Therefore, in this research, the effect of a double-row nozzle was verified in a 6 L diesel engine under low load condition by varying the diesel injection timings from top dead center(TDC) to 70 ° before TDC(BTDC) in the intervals of 10 degrees. All the results were compared with original single-row nozzle cases. The result emphasized that the benefits of a double-row nozzle on reducing NOx and smoke improved thermal efficiency under premixed combustion regimes when diesel injection timing was advanced earlier than 40 ° BTDC.

목차

Abstract
1. 서론
2. 실험 장치 구성 및 방법
3. 실험 결과 및 논의
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2023-556-000336382