메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
조준호 (명지대학교) 오승묵 (한국기계연구원) 이석환 (한국기계연구원) 이수진 (명지대학교) 차경옥 (명지대학교)
저널정보
한국자동차공학회 한국자동차공학회 추계학술대회 및 전시회 2010년 한국자동차공학회 학술대회 및 전시회
발행연도
2010.11
수록면
336 - 341 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, combustion and emission characteristics were investigated for both direct injection and port fuel injection in an LPG single cylinder spark ignition engine. The engine was operated over three different loads (2, 6, 10 bar of indicated mean effective pressure), fuel injection pressures(60, 90, 120 bar for DI, 7 bar for PFI), and air excess ratio(λ=1) at 2000 rpm. For IMEP DI type were more sensitive to fuel injection timing than PFI and showed higher thermal efficiency than that of PFI type except for 2 bar IMEP. The emission characteristics of DI type were also compared with PFI type. Hydrocarbon emission for DI type was approximately 10% lower than that of PFI type. Nitric oxides emission for both types was increased as the load increases. In addition, carbon monoxide emission for DI type was slightly decreased as the load increases.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 실험결과
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-556-001769262